Milind, You should run that command when you're ssh'ed into the device or have a serial session open. That command won't affect the N321 if it is simply run from a host terminal (I'd imagine it will just shut down your host).
Connecting via SSH: https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide#Connecting_to_the_ARM_via_SSH Setting up a Serial Console Connection: https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide#Setting_up_a_Serial_Console_Connection -Sam On Fri, Jan 10, 2020 at 6:30 AM MILIND KUMAR VADDIRAJU via USRP-users < usrp-users@lists.ettus.com> wrote: > Hi, > > I'm new to the world of SDR and have just been handed a USRP N321. The > guide here > <https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide> > strongly recommends shutting the system down correctly instead of using a > long press of the power button. However the command > > shutdown -h now > > in the terminal of a host computer connected to the USRP via an ethernet > cable fails. Could > someone please let me know what the appropriate method to shut the USRP down > is? > > Cheers, > > Milind > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
