On Thu, Jan 9, 2020 at 12:14 PM Richard Bell via USRP-users < usrp-users@lists.ettus.com> wrote:
> Hello, > > I'm working on a TDOA based localization platform using 3 USRP X300's as > receivers. I have them synchronized with a 10 MHz ref and PPS signal > generated by an OctoClock. However, I'm having trouble getting reliable > localization performance through this system. My TDOA measurements are not > what I would expect for the geometry I'm using. > > If I have the USRPs flashed with the same FPGA image and I use the same > sample rate (i.e. 200e6/22 = 9.0909 MHz) across them all, is it possible > the hardware could still be introducing different delays through each > receiver? > Did you calibrate their phases using some type of calibration signal such that you know the relative phase offsets of each radio to each other? Do you need to not know this information? Brian
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
