Sam, Everything was downloaded from the images_downloader. I have not modified the FPGA image or any of the UHD code. I have just been trying to learn how to use the N310, and compiling examples on it.
I will be back in the lab tomorrow. Should I go ahead and try installing 3.15.0.0? Jeff -------- Original message -------- From: Sam Reiter <sam.rei...@ettus.com> Date: 1/6/20 4:46 PM (GMT-06:00) To: Jeff S <e070...@hotmail.com> Cc: usrp-users@lists.ettus.com Subject: Re: [USRP-users] GPIO Example Failure on N310 Jeff, Follow-up on this. I ran the GPIO example on my N310 with 3.14.1.1 (g0347a6d8) and all GPIO tests passed. Are your FPGA image and UHD release modified? Sam Reiter Ettus Research On Fri, Jan 3, 2020 at 2:01 PM Sam Reiter <sam.rei...@ettus.com<mailto:sam.rei...@ettus.com>> wrote: Hey Jeff, Could you give this a shot on 3.15.0.0 and let me know the results? Based on that output, the issue looks confined to ATR but it's not something I've seen reported up to this point. If 3.15.0.0 shows this issue as well, I'll reproduce it on my end and get a bug filed. Sam Reiter Ettus Research On Fri, Dec 20, 2019 at 10:19 AM Jeff S via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: I built the UHD example, gpio.cpp (no modifications), and ran it on my N310 to start experimenting with the GPIO. It returned with two failures: Testing ATR TX output...fail: Bit 2 should be set, but is not Bit 10 9 8 7 6 5 4 3 2 1 0 CTRL: 0 0 0 0 0 0 0 1 1 1 1 DDR: 0 0 0 0 0 0 1 1 1 1 1 ATR_0X: 0 0 0 0 0 0 0 0 0 0 1 ATR_RX: 0 0 0 0 0 0 0 0 0 1 0 ATR_TX: 0 0 0 0 0 0 0 0 1 0 0 ATR_XX: 0 0 0 0 0 0 0 1 0 0 0 OUT: 0 0 0 0 0 0 0 0 0 0 0 READBACK: 1 1 1 1 1 1 0 0 0 0 1 Testing ATR full duplex output...fail: Bit 3 should be set, but is not Bit 10 9 8 7 6 5 4 3 2 1 0 CTRL: 0 0 0 0 0 0 0 1 1 1 1 DDR: 0 0 0 0 0 0 1 1 1 1 1 ATR_0X: 0 0 0 0 0 0 0 0 0 0 1 ATR_RX: 0 0 0 0 0 0 0 0 0 1 0 ATR_TX: 0 0 0 0 0 0 0 0 1 0 0 ATR_XX: 0 0 0 0 0 0 0 1 0 0 0 OUT: 0 0 0 0 0 0 0 0 0 0 0 READBACK: 1 1 1 1 1 1 0 0 0 0 1 2 tests failed Done! Is this something that I should be concerned about? If I compile and run the same example with my X310, everything passes. Here's the uhd_config_info --print-all from my N310: UHD 3.14.1.1-0-g0347a6d8 Build date: Thu, 26 Sep 2019 01:26:32 C compiler: GNU 7.3.0 C++ compiler: GNU 7.3.0 C flags: -DHAVE_CONFIG_H -DUHD_LOG_MIN_LEVEL=1 -DUHD_LOG_CONSOLE_LEVEL=2 -DUHD_LOG_FILE_LEVEL=2 -DUHD_LOG_CONSOLE_COLOR -DHAVE_LIBER IO -march=armv7-a -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a9 --sysroot=/home/oe-builder/build/tmp-glibc/work/cortexa9hf-neon -oe-linux-gnueabi/uhd/3.14.1.1-r1/recipe-sysroot -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/oe-builder/bu ild/tmp-glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.14.1.1-r1=/usr/src/debug/uhd/3.14.1.1-r1 -fdebug-prefix-map=/home/oe-build er/build/tmp-glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.14.1.1-r1/recipe-sysroot= -fdebug-prefix-map=/home/oe-builder/build/t mp-glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.14.1.1-r1/recipe-sysroot-native= -march=armv7-a -marm -mfpu=neon -mfloat-abi= hard -mcpu=cortex-a9 --sysroot=/home/oe-builder/build/tmp-glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.14.1.1-r1/recipe-sysroo t C++ flags: -DHAVE_CONFIG_H -DUHD_LOG_MIN_LEVEL=1 -DUHD_LOG_CONSOLE_LEVEL=2 -DUHD_LOG_FILE_LEVEL=2 -DUHD_LOG_CONSOLE_COLOR -DHAVE_LIB ERIO -march=armv7-a -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a9 --sysroot=/home/oe-builder/build/tmp-glibc/work/cortexa9hf-ne on-oe-linux-gnueabi/uhd/3.14.1.1-r1/recipe-sysroot -O2 -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/oe-builder/ build/tmp-glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.14.1.1-r1=/usr/src/debug/uhd/3.14.1.1-r1 -fdebug-prefix-map=/home/oe-bui lder/build/tmp-glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.14.1.1-r1/recipe-sysroot= -fdebug-prefix-map=/home/oe-builder/build /tmp-glibc/work/cortexa9hf-neon-oe-linux-gnueabi/uhd/3.14.1.1-r1/recipe-sysroot-native= -fvisibility-inlines-hidden -march=armv7-a -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a9 --sysroot=/home/oe-builder/build/tmp-glibc/work/cortexa9hf-neon-oe-linux-gnueabi /uhd/3.14.1.1-r1/recipe-sysroot -fvisibility=hidden -fvisibility-inlines-hidden Enabled components: LibUHD, LibUHD - C API, Examples, Utils, Tests, LIBERIO, USB, GPSD, MPMD, N300, N320, E320 Install prefix: /usr Boost version: 1.66 Libusb version: 1.0.23 Package path: /usr Images directory: /usr/share/uhd/images ABI version string: 3.14.1 Thanks, Jeff _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
