Marcus: Don't know when. I just left the E320 running overnight.
There is no user code running on it; neither is it communicating with the host or doing any Rx/Tx. I just updated the UHD software/mender on it yesterday. I had a screen session running and I noticed the kernel panic this morning when I came in. So I am unable to pinpoint a particular sequence of operations that causes this to happen. Thank you Subu On Mon, Jan 6, 2020 at 12:44 PM Marcus Müller <marcus.muel...@ettus.com> wrote: > Hi Subu, > > when exactly does the panic occur? > > Best regards, > Marcus > On Mon, 2020-01-06 at 11:12 +0000, Subu Rama via USRP-users wrote: > > I have a kernel panic on the E320 with the most recent release > > v3.15.0.0 > > (I used the most recent mender process). > > > > Details on E320 to be used in the test setup: > > > > eth0 --- Management - 192.168.1.2/24 > > sfp0 --- Data - 192.168.10.2/24 > > > > root@ni-e320-31BB638:~# ip a > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000 > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > > inet 127.0.0.1/8 scope host lo > > valid_lft forever preferred_lft forever > > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast > > qlen 1000 > > link/ether 00:80:2f:28:8d:7e brd ff:ff:ff:ff:ff:ff > > inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0 > > valid_lft forever preferred_lft forever > > 3: sfp0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 8000 qdisc pfifo_fast > > qlen 1000 > > link/ether 00:80:2f:28:8d:7f brd ff:ff:ff:ff:ff:ff > > inet 192.168.10.2/24 brd 192.168.10.255 scope global sfp0 > > valid_lft forever preferred_lft forever > > root@ni-e320-31BB638:~# > > > > MTU was changed to 1500 bytes as we are using the SFP to 1G adapter > > to connect to a 1Gbps port on a switch. > > > > ------------------------ > > ramasu@nuc-qrc3:~$ uhd_find_devices > > [INFO] [UHD] linux; GNU C++ version 9.2.1 20191008; Boost_107200; > > UHD_3.15.0.0-0-gaea0e2de > > -------------------------------------------------- > > -- UHD Device 0 > > -------------------------------------------------- > > Device Address: > > serial: 31BB638 > > claimed: False > > mgmt_addr: 192.168.1.2 > > product: e320 > > reachable: No > > type: e3xx > > > > ------------------------- > > ramasu@nuc-qrc3:~$ uhd_config_info --print-all > > UHD 3.15.0.0-0-gaea0e2de > > Build date: Sun, 05 Jan 2020 17:26:13 > > C compiler: GNU 9.2.1 > > C++ compiler: GNU 9.2.1 > > C flags: -DBOOST_ERROR_CODE_HEADER_ONLY > > -DBOOST_ASIO_DISABLE_STD_STRING_VIEW > > -DBOOST_ASIO_DISABLE_STD_EXPERIMENTAL_STRING_VIEW -DUHD_RFNOC_ENABLED > > -DHAVE_CONFIG_H -DUHD_LOG_MIN_LEVEL=1 -DUHD_LOG_CONSOLE_LEVEL=2 > > -DUHD_LOG_FILE_LEVEL=2 -DUHD_LOG_CONSOLE_COLOR > > C++ flags: -DBOOST_ERROR_CODE_HEADER_ONLY > > -DBOOST_ASIO_DISABLE_STD_STRING_VIEW > > -DBOOST_ASIO_DISABLE_STD_EXPERIMENTAL_STRING_VIEW -DUHD_RFNOC_ENABLED > > -DHAVE_CONFIG_H -DUHD_LOG_MIN_LEVEL=1 -DUHD_LOG_CONSOLE_LEVEL=2 > > -DUHD_LOG_FILE_LEVEL=2 -DUHD_LOG_CONSOLE_COLOR -fvisibility=hidden > > -fvisibility-inlines-hidden > > Enabled components: LibUHD, LibUHD - C API, LibUHD - Python API, > > Examples, Utils, Tests, USB, B100, B200, USRP1, USRP2, X300, N230, > > MPMD, N300, N320, E320, E300, OctoClock > > Install prefix: /usr/local > > Boost version: 1.72 > > Libusb version: 1.0.25 > > Package path: /usr/local > > Images directory: /usr/local/share/uhd/images > > ABI version string: 3.15.0 > > ------------------------------- > > > > root@ni-e320-31BB638:~# uhd_usrp_probe > > > > [INFO] [UHD] linux; GNU C++ version 8.2.0; Boost_106800; > > UHD_3.15.0.0-0-gaea0e2de > > [INFO] [MPMD] Initializing 1 device(s) in parallel with args: > > mgmt_addr=127.0.0.1,type=e3xx,product=e320,serial=31BB638,claimed=Fal > > se > > [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: > > 0xF1F0D00000000000) > > [INFO] [MPM.PeriphManager] init() called with device args > > `mgmt_addr=127.0.0.1,product=e320'. > > [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1339 MB/s) > > [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1336 MB/s) > > [INFO] [0/Radio_0] Initializing block control (NOC ID: > > 0x12AD100000003320) > > [INFO] [0/DDC_0] Initializing block control (NOC ID: > > 0xDDC0000000000000) > > [INFO] [0/DUC_0] Initializing block control (NOC ID: > > 0xD0C0000000000002) > > [INFO] [0/Radio_0] Performing CODEC loopback test... > > [INFO] [0/Radio_0] CODEC loopback test passed > > [INFO] [0/Radio_0] Performing CODEC loopback test... > > [INFO] [0/Radio_0] CODEC loopback test passed > > _____________________________________________________ > > / > > | Device: E300-Series Device > > | _____________________________________________________ > > | / > > | | Mboard: ni-e320-31BB638 > > | | eeprom_version: 2 > > | | mpm_version: 3.15.0.0-gaea0e2de > > | | pid: 58144 > > | | product: e320 > > | | rev: 4 > > | | rpc_connection: local > > | | serial: 31BB638 > > | | type: e3xx > > | | MPM Version: 1.2 > > | | FPGA Version: 3.1 > > | | FPGA git hash: fde2a94.clean > > | | RFNoC capable: Yes > > | | > > | | Time sources: internal, external, gpsdo > > | | Clock sources: external, internal, gpsdo > > | | Sensors: gps_gpgga, gps_locked, temp_internal, fan, gps_time, > > temp_fpga, gps_tpv, temp_main_power, gps_sky, temp_rf_channelB, > > temp_rf_channelA, ref_locked > > | | _____________________________________________________ > > | | / > > | | | RX Dboard: A > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 0 > > | | | | Name: E3xx > > | | | | Antennas: RX2, TX/RX > > | | | | Sensors: lo_locked, ad9361_temperature, lo_lock, rssi > > | | | | Freq range: 70.000 to 6000.000 MHz > > | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB > > | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 1 > > | | | | Name: E3xx > > | | | | Antennas: RX2, TX/RX > > | | | | Sensors: lo_locked, ad9361_temperature, lo_lock, rssi > > | | | | Freq range: 70.000 to 6000.000 MHz > > | | | | Gain range PGA: 0.0 to 76.0 step 1.0 dB > > | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Codec: A > > | | | | Name: AD9361 Dual ADC > > | | | | Gain Elements: None > > | | _____________________________________________________ > > | | / > > | | | TX Dboard: A > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 0 > > | | | | Name: E3xx > > | | | | Antennas: TX/RX > > | | | | Sensors: lo_locked, ad9361_temperature > > | | | | Freq range: 47.000 to 6000.000 MHz > > | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB > > | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 1 > > | | | | Name: E3xx > > | | | | Antennas: TX/RX > > | | | | Sensors: lo_locked, ad9361_temperature > > | | | | Freq range: 47.000 to 6000.000 MHz > > | | | | Gain range PGA: 0.0 to 89.8 step 0.2 dB > > | | | | Bandwidth range: 20000000.0 to 40000000.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Codec: A > > | | | | Name: AD9361 Dual DAC > > | | | | Gain Elements: None > > | | _____________________________________________________ > > | | / > > | | | RFNoC blocks on this device: > > | | | > > | | | * DmaFIFO_0 > > | | | * Radio_0 > > | | | * DDC_0 > > | | | * DUC_0 > > > > > > -------------------------------------------------------------- > > Kernel panic: > > > > ni-e320-31BB638 login: [ 15.050303] nixge 40000000.ethernet sfp0: > > Link is Up - 1Gbps/Full - flow co > > ntrol off > > [ 340.982001] cros-ec-dev cros-ec-dev.0.auto: Some logs may have > > been dropped... > > [35770.507386] Unable to handle kernel paging request at virtual > > address fffffffe > > [35770.514558] pgd = e909f41c > > [35770.517224] [fffffffe] *pgd=2fffd861, *pte=00000000, > > *ppte=00000000 > > [35770.523528] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM > > [35770.529385] Modules linked in: > > [35770.532420] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.18.33- > > yocto-standard #1 > > [35770.539714] Hardware name: Xilinx Zynq Platform > > [35770.544226] PC is at 0xfffffffe > > [35770.547351] LR is at rcu_process_callbacks+0x55c/0x60c > > [35770.552470] pc : [<fffffffe>] lr : [<c018863c>] psr: > > a0000133 > > [35770.558720] sp : c0e01d70 ip : c0e01d70 fp : c0e01dcc > > [35770.563927] r10: c0e01d70 r9 : ef6d6860 r8 : c0e15040 > > [35770.569135] r7 : c0e03cb0 r6 : c0e01d8c r5 : c0e15040 r4 : > > ef6d6840 > > [35770.575647] r3 : ffffffff r2 : ffffffff r1 : efd56a04 r0 : > > eccf8994 > > [35770.582158] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA Thumb > > Segment none > > [35770.589452] Control: 18c5387d Table: 2d51c04a DAC: 00000051 > > [35770.595177] Process swapper/0 (pid: 0, stack limit = 0x8c540e68) > > [35770.601166] Stack: (0xc0e01d70 to 0xc0e02000) > > [35770.605506] 1d60: 60000113 > > 00000000 00000001 c0e03c88 > > [35770.613676] 1d80: 0000000a c0ea40a0 ef6d60c0 ffffffff ed239e40 > > ffffffcb fffffffc a646c33b > > [35770.621835] 1da0: ffffe000 c0e020a4 ffffe000 00000009 00000002 > > 0000000a 00000101 c0e02080 > > [35770.629994] 1dc0: c0e01e14 c0e01dd0 c0102c28 c01880ec 00000000 > > c0d93c6c 00000011 00000002 > > [35770.638153] 1de0: 00361faa 00200102 c053ce98 c0d93c80 00000000 > > c0d93c6c 00000011 ef03c800 > > [35770.646312] 1e00: 00000001 c0e01e88 c0e01e2c c0e01e18 c0129100 > > c01029d4 00000000 00000000 > > [35770.654471] 1e20: c0e01e5c c0e01e30 c017af58 c0129084 c0e01e88 > > f8f00100 c0e0450c c0e01e88 > > [35770.662631] 1e40: c0e6ebec f8f01100 c0e00000 00002088 c0e01e84 > > c0e01e60 c0102990 c017aec0 > > [35770.670790] 1e60: c0767d78 60000013 ffffffff c0e01ebc 00002088 > > c0e00000 c0e01f1c c0e01e88 > > [35770.678948] 1e80: c01020cc c0102934 00000000 c0ad7208 004d938c > > 00000000 ef6d5438 00000001 > > [35770.687108] 1ea0: c0ea44c4 c0e8f99c 00002088 78614ac2 00002088 > > c0e01f1c c0e01eb0 c0e01ed8 > > [35770.695267] 1ec0: c053ce74 c0767d78 60000013 ffffffff 00000051 > > 00000000 c0d8f504 2e942000 > > [35770.703426] 1ee0: 782518dc 00000000 c0e01f04 c0e01ef8 c053ce74 > > ef6d5438 c0e8f99c c0e03c88 > > [35770.711586] 1f00: c0e03cb0 ffffe000 c0e03d00 00000001 c0e01f2c > > c0e01f20 c0767ed4 c0767ad0 > > [35770.719745] 1f20: c0e01f3c c0e01f30 c0153428 c0767ebc c0e01f7c > > c0e01f40 c0153848 c01533f0 > > [35770.727903] 1f40: 000000c2 00000001 01e03c88 a646c33b c0e03c80 > > 000000c2 00000002 c0e03c88 > > [35770.736064] 1f60: ffffffff c0e03c80 efffcd80 c0d5de40 c0e01f8c > > c0e01f80 c0153bac c0153674 > > [35770.744223] 1f80: c0e01fa4 c0e01f90 c08f30dc c0153b90 c0eaef98 > > c0eaef40 c0e01ff4 c0e01fa8 > > [35770.752382] 1fa0: c0d00f18 c08f3030 ffffffff ffffffff 00000000 > > c0d00608 00000000 c0d5de40 > > [35770.760540] 1fc0: a642d11a 00000000 00000000 c0d00330 00000051 > > 10c0387d 00000000 1fff9000 > > [35770.768700] 1fe0: 413fc090 18c5387d 00000000 c0e01ff8 00000000 > > c0d00b30 00000000 00000000 > > [35770.776874] [<c018863c>] (rcu_process_callbacks) from [<c0102c28>] > > (__do_softirq+0x260/0x3dc) > > [35770.785375] [<c0102c28>] (__do_softirq) from [<c0129100>] > > (irq_exit+0x88/0xe0) > > [35770.792578] [<c0129100>] (irq_exit) from [<c017af58>] > > (__handle_domain_irq+0xa4/0xf0) > > [35770.800386] [<c017af58>] (__handle_domain_irq) from [<c0102990>] > > (gic_handle_irq+0x68/0xa0) > > [35770.808716] [<c0102990>] (gic_handle_irq) from [<c01020cc>] > > (__irq_svc+0x6c/0xa8) > > [35770.816173] Exception stack(0xc0e01e88 to 0xc0e01ed0) > > [35770.821205] 1e80: 00000000 c0ad7208 004d938c > > 00000000 ef6d5438 00000001 > > [35770.829373] 1ea0: c0ea44c4 c0e8f99c 00002088 78614ac2 00002088 > > c0e01f1c c0e01eb0 c0e01ed8 > > [35770.837529] 1ec0: c053ce74 c0767d78 60000013 ffffffff > > [35770.842568] [<c01020cc>] (__irq_svc) from [<c0767d78>] > > (cpuidle_enter_state+0x2b4/0x3c0) > > [35770.850644] [<c0767d78>] (cpuidle_enter_state) from [<c0767ed4>] > > (cpuidle_enter+0x24/0x28) > > [35770.858892] [<c0767ed4>] (cpuidle_enter) from [<c0153428>] > > (call_cpuidle+0x44/0x48) > > [35770.866526] [<c0153428>] (call_cpuidle) from [<c0153848>] > > (do_idle+0x1e0/0x27c) > > [35770.873815] [<c0153848>] (do_idle) from [<c0153bac>] > > (cpu_startup_entry+0x28/0x2c) > > [35770.881367] [<c0153bac>] (cpu_startup_entry) from [<c08f30dc>] > > (rest_init+0xb8/0xd8) > > [35770.889098] [<c08f30dc>] (rest_init) from [<c0d00f18>] > > (start_kernel+0x3f4/0x498) > > [35770.896555] Code: bad PC value > > 35770.899675] ---[ end trace 198f77e2133e0637 ]--- > > [35770.904225] Kernel panic - not syncing: Fatal exception in > > interrupt > > [35770.910564] CPU1: stopping > > [35770.913253] CPU: 1 PID: 93 Comm: systemd-journal Tainted: G D > > 4.18.33-yocto-standard #1 > > [35770.922540] Hardware name: Xilinx Zynq Platform > > [35770.927067] [<c01130a4>] (unwind_backtrace) from [<c010d548>] > > (show_stack+0x20/0x24) > > [35770.934790] [<c010d548>] (show_stack) from [<c08dfbe0>] > > (dump_stack+0x7c/0x98) > > [35770.941990] [<c08dfbe0>] (dump_stack) from [<c010ff94>] > > (handle_IPI+0x254/0x358) > > [35770.949368] [<c010ff94>] (handle_IPI) from [<c01029bc>] > > (gic_handle_irq+0x94/0xa0) > > [35770.956918] [<c01029bc>] (gic_handle_irq) from [<c01024d4>] > > (__irq_usr+0x54/0x80) > > [35770.964375] Exception stack(0xedc77fb0 to 0xedc77ff8) > > [35770.969407] 7fa0: 000000e8 > > 00000000 00000018 00000000 > > [35770.977576] 7fc0: 0003c378 00000000 00038090 be9942dc b6d2e350 > > 00000006 b64b7378 be99428c > > [35770.985733] 7fe0: 00000006 be994250 b6e2ae8d b6e1e744 80000030 > > ffffffff > > [35770.992329] ---[ end Kernel panic - not syncing: Fatal exception > > in interrupt ]--- > > > > > > Any ideas? > > > > Thank you > > Subu > > > > _______________________________________________ > > USRP-users mailing list > > USRP-users@lists.ettus.com > > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
