Hi,
> I wonder if there is an operation mode where TX and RX use the SAME LO, or
> some trick to achieve this. Probably not?
The AD9361 itself allows for external LO injection ( RX_EXT_LO_IN ,
TX_EXT_LO_IN ), but that's not broken out in anyway on a B2xx.
You'd need serious rework skill to get to them. They are on the edge
of the BGA, so it's doable ...
> The difference between using one LO for TX and RX and using two separate
> synthesizers, even if they are phase-synchronous and set to the same
> frequency, is that two synthesizers have independent 1/f noise introduced by
> the PLL. If using one LO, and feeding TX back to RX, this noise is canceled
> by the mixing and does not show up in the base band signal.
How about using a direct cross connect from the second TX channel
(transmitting a DC tone) to the second RX channel. Wouldn't that allow
you to cancel out the noise mathematically ?
Cheers,
Sylvain
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
