Hello group, I have run into an issue with the RX_B port (channel 1) on the E312 that I haven't been able to make any sense of.
RX_A (channel 0) works great: I get clear in-phase and quadrature components that I have been able to graph<https://imgur.com/dQRl5mN>. When I do the same thing with RX_B (channel 1), I get something completely unexpected<https://imgur.com/4WgU5R5>. I am using the same rate (=0.5 Msps) frequency (=900 MHz), gain (=50 dB), bandwidth (=200 kHz) on each and have had this happen whether I use both channels at the same time or read from RX_B individually. I haven't had anything like this happen when I transmit on both TX_A and TX_B, and I have tested this on multiple USRP E312 radios and 900 MHz antennas to make sure it wasn't something unrelated to the channel/port itself. Does anyone know what could be happening? -Isaac Beeman
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
