Hi Bisma,

You should download the FPGA images for your installed version of UHD (with
uhd_images_downloader) and then write a new FPGA image to the E320 using
the uhd_image_loader utility.

UHD will work on Ubuntu 19.x.

Regards,
Nate Temple

On Wed, Nov 6, 2019 at 2:38 AM Bisma Amjad via USRP-users <
usrp-users@lists.ettus.com> wrote:

> Hi there,
>
>
> ·         I have installed GNU Radio using PyBombs from
> http://ecee.colorado.edu/~mathys/ecen4652/SDRsoftware/GNURadioInstall.html
>
>
>
> ·         UHD was installed from
> https://kb.ettus.com/Building_and_Installing_the_USRP_Open-Source_Toolchain_(UHD_and_GNU_Radio)_on_Linux
>
>
>
> ·         GNU Radio works fine. I’ve created an FM Radio application on
> it.  USRP E320 is also detected on the system. However, when the flowgraph
> is executed on GNU Radio, following error shows up:
>
>
>
> *RuntimeError: FPGA component ‘noc_shell’ is revision 2 and UHD supports
> revision 3. Please either upgrade the FPGA image (Recommended) or downgrade
> UHD.*
>
> *Troubleshooting:*
>
> ·As indicated by few web sources, Pybombs could’ve created issues during
> GNU Radio installation. So, I re-installed GNU radio and UHD without using
> pybombs (from
> https://kb.ettus.com/Building_and_Installing_the_USRP_Open-Source_Toolchain_(UHD_and_GNU_Radio)_on_Linux)
> .
>
>  But the error still persists.
>
>
>
> *RuntimeError: FPGA component ‘noc_shell’ is revision 2 and UHD supports
> revision 6. Please either upgrade the FPGA image (Recommended) or downgrade
> UHD.*
>
>
>
>
>
> ·Moreover, the required installation libraries for UHD are supported for
> Ubuntu version 18.10 or less. Whereas, our system has Ubuntu version 19.0.
> Could this be the possible reason for this issue? Should I downgrade Ubuntu
> to 18.10?
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to