So here is the trace for the gain block, and it certainly is loading the
right XML file it seems. 🤔
[DEBUG] [RFNOC] Reading XML file
/home/root/newinstall/usr/share/uhd/rfnoc/blocks/gain.xml for NOC ID
0xB7DD64941A952AAC
[TRACE] [RFNOC] [RFNoC Factory] block_ctrl_base::make()
[DEBUG] [RFNOC] Reading XML file
/home/root/newinstall/usr/share/uhd/rfnoc/blocks/gain.xml for NOC ID
0xB7DD64941A952AAC
[TRACE] [RFNOC] [RFNoC Factory] Using controller key 'gain' and block name
'gain'
[DEBUG] [RFNOC] Reading XML file
/home/root/newinstall/usr/share/uhd/rfnoc/blocks/gain.xml for NOC ID
0xB7DD64941A952AAC
[INFO] [0/gain_0] Initializing block control (NOC ID: 0xB7DD64941A952AAC)
[DEBUG] [0/gain_0] Checking compat number for FPGA component `noc_shell':
Expecting 5.1, actual: 5.1.
[TRACE] [0/gain_0] Adding port definition at xbar/gain_0/ports/in/0: type =
'sc16' pkt_size = '0' vlen = '0'
[TRACE] [0/gain_0] Adding port definition at xbar/gain_0/ports/out/0: type
= 'sc16' pkt_size = '0' vlen = '0'
[DEBUG] [E300] [E300] Setting up dest map for host ep 112 to be stream 3
However I don't show it instantiating any of the args. I did vim the file
and it appears correct (output below).
<?xml version="1.0"?>
<!--Default XML file-->
<nocblock>
<name>gain</name>
<blockname>gain</blockname>
<ids>
<id revision="0">B7DD64941A952AAC</id>
</ids>
<!-- Registers -->
<registers>
<setreg>
<name>GAIN</name>
<address>128</address>
</setreg>
</registers>
<!-- Args -->
<args>
<args>
<name>gain</name>
<type>double</type>
<value>1.0</value>
<check>GE($gain, 0.0) AND LE($gain, 32767.0)</check>
<check_message>Invalid Gain!</check_message>
<action>
SR_WRITE("GAIN", IROUND($gain))
</action>
</args>
</args>
<!--One input, one output. If this is used, better have all the info the
C++ file.-->
<ports>
<sink>
<name>in0</name>
<type>sc16</type>
</sink>
<source>
<name>out0</name>
<type>sc16</type>
</source>
</ports>
</nocblock>
Regards,
Jon
On Fri, Nov 22, 2019 at 10:51 AM Jonathan Lockhart <jlockhar...@gmail.com>
wrote:
> NVM, I got it set. I am teasing through the long console output now. Might
> of wanted to set the file log instead. Live and learn.
>
> On Fri, Nov 22, 2019 at 10:20 AM EJ Kreinar <ejkrei...@gmail.com> wrote:
>
>> Good progress, agreed it looks like the gain arg isn't getting created
>> here...
>>
>> If you run with log level trace, rfnoc should (might?) indicate the xml
>> file it loaded. I'd try to find that xml and confirm it looks like what you
>> expect, with the gain arg entry.
>>
>> Also, perhaps grep your prefix and share directories on the embedded
>> device to search for any other xml files that might match the noc id or
>> provide the same "gain" block... I've definitely fought with conflicting
>> xml definitions before, you might be seeing that here.
>>
>> EJ
>>
>> On Fri, Nov 22, 2019, 9:36 AM Jonathan Lockhart <jlockhar...@gmail.com>
>> wrote:
>>
>>> Hey EJ,
>>>
>>> Sorry for being slow I had to dig around to set that UHD Log variable,
>>> which easy enough it was just a simple export. I then ran uhd_usrp_probe
>>> with the --tree and setting the fpga to my bit file. Here is the output
>>> from the probe.
>>>
>>> root@ettus-e3xx-sg3:~# uhd_usrp_probe
>>> --args="fpga=./newinstall/e300.bit" --tree
>>> [INFO] [UHD] linux; GNU C++ version 4.9.2; Boost_105700;
>>> UHD_3.14.1.HEAD-0-g0347a6d8
>>> [INFO] [E300] Loading FPGA image: ./newinstall/e300.bit...
>>> [INFO] [E300] FPGA image loaded
>>> [INFO] [E300] Detecting internal GPS
>>> .... [INFO] [E300] GPSDO found
>>> [INFO] [E300] Initializing core control (global registers)...
>>>
>>> [INFO] [E300] Performing register loopback test...
>>> [INFO] [E300] Register loopback test passed
>>> [INFO] [0/Radio_0] Initializing block control (NOC ID:
>>> 0x12AD100000000000)
>>> [WARNING] [RFNOC] Can't find a block controller for key gain, using
>>> default block controller!
>>> [INFO] [0/gain_0] Initializing block control (NOC ID: 0xB7DD64941A952AAC)
>>> [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000)
>>> [WARNING] [RFNOC] Can't find a block controller for key FFT, using
>>> default block controller!
>>> [INFO] [0/FFT_0] Initializing block control (NOC ID: 0xFF70000000000000)
>>> /
>>> /name
>>> /mboards
>>> /mboards/0
>>> /mboards/0/name
>>> /mboards/0/codename
>>> /mboards/0/fpga_version
>>> /mboards/0/fpga_version_hash
>>> /mboards/0/clock_source
>>> /mboards/0/clock_source/value
>>> /mboards/0/clock_source/options
>>> /mboards/0/sensors
>>> /mboards/0/sensors/temp
>>> /mboards/0/sensors/ref_locked
>>> /mboards/0/sensors/gps_locked
>>> /mboards/0/sensors/gps_time
>>> /mboards/0/sensors/gps_position
>>> /mboards/0/sensors/gps_gpgga
>>> /mboards/0/sensors/gps_gprmc
>>> /mboards/0/eeprom
>>> /mboards/0/dboards
>>> /mboards/0/dboards/A
>>> /mboards/0/dboards/A/rx_eeprom
>>> /mboards/0/dboards/A/tx_eeprom
>>> /mboards/0/dboards/A/gdb_eeprom
>>> /mboards/0/dboards/A/rx_frontends
>>> /mboards/0/dboards/A/rx_frontends/A
>>> /mboards/0/dboards/A/rx_frontends/A/name
>>> /mboards/0/dboards/A/rx_frontends/A/sensors
>>> /mboards/0/dboards/A/rx_frontends/A/sensors/temp
>>> /mboards/0/dboards/A/rx_frontends/A/sensors/rssi
>>> /mboards/0/dboards/A/rx_frontends/A/sensors/lo_locked
>>> /mboards/0/dboards/A/rx_frontends/A/gains
>>> /mboards/0/dboards/A/rx_frontends/A/gains/PGA
>>> /mboards/0/dboards/A/rx_frontends/A/gains/PGA/range
>>> /mboards/0/dboards/A/rx_frontends/A/gains/PGA/value
>>> /mboards/0/dboards/A/rx_frontends/A/connection
>>> /mboards/0/dboards/A/rx_frontends/A/enabled
>>> /mboards/0/dboards/A/rx_frontends/A/use_lo_offset
>>> /mboards/0/dboards/A/rx_frontends/A/bandwidth
>>> /mboards/0/dboards/A/rx_frontends/A/bandwidth/value
>>> /mboards/0/dboards/A/rx_frontends/A/bandwidth/range
>>> /mboards/0/dboards/A/rx_frontends/A/freq
>>> /mboards/0/dboards/A/rx_frontends/A/freq/range
>>> /mboards/0/dboards/A/rx_frontends/A/freq/value
>>> /mboards/0/dboards/A/rx_frontends/A/dc_offset
>>> /mboards/0/dboards/A/rx_frontends/A/dc_offset/enable
>>> /mboards/0/dboards/A/rx_frontends/A/iq_balance
>>> /mboards/0/dboards/A/rx_frontends/A/iq_balance/enable
>>> /mboards/0/dboards/A/rx_frontends/A/gain
>>> /mboards/0/dboards/A/rx_frontends/A/gain/agc
>>> /mboards/0/dboards/A/rx_frontends/A/gain/agc/enable
>>> /mboards/0/dboards/A/rx_frontends/A/gain/agc/mode
>>> /mboards/0/dboards/A/rx_frontends/A/gain/agc/mode/value
>>> /mboards/0/dboards/A/rx_frontends/A/gain/agc/mode/options
>>> /mboards/0/dboards/A/rx_frontends/A/filters
>>> /mboards/0/dboards/A/rx_frontends/A/filters/DEC_3
>>> /mboards/0/dboards/A/rx_frontends/A/filters/DEC_3/value
>>> /mboards/0/dboards/A/rx_frontends/A/filters/FIR_1
>>> /mboards/0/dboards/A/rx_frontends/A/filters/FIR_1/value
>>> /mboards/0/dboards/A/rx_frontends/A/filters/HB_1
>>> /mboards/0/dboards/A/rx_frontends/A/filters/HB_1/value
>>> /mboards/0/dboards/A/rx_frontends/A/filters/HB_2
>>> /mboards/0/dboards/A/rx_frontends/A/filters/HB_2/value
>>> /mboards/0/dboards/A/rx_frontends/A/filters/HB_3
>>> /mboards/0/dboards/A/rx_frontends/A/filters/HB_3/value
>>> /mboards/0/dboards/A/rx_frontends/A/filters/LPF_BB
>>> /mboards/0/dboards/A/rx_frontends/A/filters/LPF_BB/value
>>> /mboards/0/dboards/A/rx_frontends/A/filters/LPF_TIA
>>> /mboards/0/dboards/A/rx_frontends/A/filters/LPF_TIA/value
>>> /mboards/0/dboards/A/rx_frontends/A/antenna
>>> /mboards/0/dboards/A/rx_frontends/A/antenna/options
>>> /mboards/0/dboards/A/rx_frontends/A/antenna/value
>>> /mboards/0/dboards/A/rx_frontends/B
>>> /mboards/0/dboards/A/rx_frontends/B/name
>>> /mboards/0/dboards/A/rx_frontends/B/sensors
>>> /mboards/0/dboards/A/rx_frontends/B/sensors/temp
>>> /mboards/0/dboards/A/rx_frontends/B/sensors/rssi
>>> /mboards/0/dboards/A/rx_frontends/B/sensors/lo_locked
>>> /mboards/0/dboards/A/rx_frontends/B/gains
>>> /mboards/0/dboards/A/rx_frontends/B/gains/PGA
>>> /mboards/0/dboards/A/rx_frontends/B/gains/PGA/range
>>> /mboards/0/dboards/A/rx_frontends/B/gains/PGA/value
>>> /mboards/0/dboards/A/rx_frontends/B/connection
>>> /mboards/0/dboards/A/rx_frontends/B/enabled
>>> /mboards/0/dboards/A/rx_frontends/B/use_lo_offset
>>> /mboards/0/dboards/A/rx_frontends/B/bandwidth
>>> /mboards/0/dboards/A/rx_frontends/B/bandwidth/value
>>> /mboards/0/dboards/A/rx_frontends/B/bandwidth/range
>>> /mboards/0/dboards/A/rx_frontends/B/freq
>>> /mboards/0/dboards/A/rx_frontends/B/freq/range
>>> /mboards/0/dboards/A/rx_frontends/B/freq/value
>>> /mboards/0/dboards/A/rx_frontends/B/dc_offset
>>> /mboards/0/dboards/A/rx_frontends/B/dc_offset/enable
>>> /mboards/0/dboards/A/rx_frontends/B/iq_balance
>>> /mboards/0/dboards/A/rx_frontends/B/iq_balance/enable
>>> /mboards/0/dboards/A/rx_frontends/B/gain
>>> /mboards/0/dboards/A/rx_frontends/B/gain/agc
>>> /mboards/0/dboards/A/rx_frontends/B/gain/agc/enable
>>> /mboards/0/dboards/A/rx_frontends/B/gain/agc/mode
>>> /mboards/0/dboards/A/rx_frontends/B/gain/agc/mode/value
>>> /mboards/0/dboards/A/rx_frontends/B/gain/agc/mode/options
>>> /mboards/0/dboards/A/rx_frontends/B/filters
>>> /mboards/0/dboards/A/rx_frontends/B/filters/DEC_3
>>> /mboards/0/dboards/A/rx_frontends/B/filters/DEC_3/value
>>> /mboards/0/dboards/A/rx_frontends/B/filters/FIR_1
>>> /mboards/0/dboards/A/rx_frontends/B/filters/FIR_1/value
>>> /mboards/0/dboards/A/rx_frontends/B/filters/HB_1
>>> /mboards/0/dboards/A/rx_frontends/B/filters/HB_1/value
>>> /mboards/0/dboards/A/rx_frontends/B/filters/HB_2
>>> /mboards/0/dboards/A/rx_frontends/B/filters/HB_2/value
>>> /mboards/0/dboards/A/rx_frontends/B/filters/HB_3
>>> /mboards/0/dboards/A/rx_frontends/B/filters/HB_3/value
>>> /mboards/0/dboards/A/rx_frontends/B/filters/LPF_BB
>>> /mboards/0/dboards/A/rx_frontends/B/filters/LPF_BB/value
>>> /mboards/0/dboards/A/rx_frontends/B/filters/LPF_TIA
>>> /mboards/0/dboards/A/rx_frontends/B/filters/LPF_TIA/value
>>> /mboards/0/dboards/A/rx_frontends/B/antenna
>>> /mboards/0/dboards/A/rx_frontends/B/antenna/options
>>> /mboards/0/dboards/A/rx_frontends/B/antenna/value
>>> /mboards/0/dboards/A/tx_frontends
>>> /mboards/0/dboards/A/tx_frontends/A
>>> /mboards/0/dboards/A/tx_frontends/A/name
>>> /mboards/0/dboards/A/tx_frontends/A/sensors
>>> /mboards/0/dboards/A/tx_frontends/A/sensors/temp
>>> /mboards/0/dboards/A/tx_frontends/A/sensors/lo_locked
>>> /mboards/0/dboards/A/tx_frontends/A/gains
>>> /mboards/0/dboards/A/tx_frontends/A/gains/PGA
>>> /mboards/0/dboards/A/tx_frontends/A/gains/PGA/range
>>> /mboards/0/dboards/A/tx_frontends/A/gains/PGA/value
>>> /mboards/0/dboards/A/tx_frontends/A/connection
>>> /mboards/0/dboards/A/tx_frontends/A/enabled
>>> /mboards/0/dboards/A/tx_frontends/A/use_lo_offset
>>> /mboards/0/dboards/A/tx_frontends/A/bandwidth
>>> /mboards/0/dboards/A/tx_frontends/A/bandwidth/value
>>> /mboards/0/dboards/A/tx_frontends/A/bandwidth/range
>>> /mboards/0/dboards/A/tx_frontends/A/freq
>>> /mboards/0/dboards/A/tx_frontends/A/freq/range
>>> /mboards/0/dboards/A/tx_frontends/A/freq/value
>>> /mboards/0/dboards/A/tx_frontends/A/filters
>>> /mboards/0/dboards/A/tx_frontends/A/filters/FIR_1
>>> /mboards/0/dboards/A/tx_frontends/A/filters/FIR_1/value
>>> /mboards/0/dboards/A/tx_frontends/A/filters/HB_1
>>> /mboards/0/dboards/A/tx_frontends/A/filters/HB_1/value
>>> /mboards/0/dboards/A/tx_frontends/A/filters/HB_2
>>> /mboards/0/dboards/A/tx_frontends/A/filters/HB_2/value
>>> /mboards/0/dboards/A/tx_frontends/A/filters/HB_3
>>> /mboards/0/dboards/A/tx_frontends/A/filters/HB_3/value
>>> /mboards/0/dboards/A/tx_frontends/A/filters/INT_3
>>> /mboards/0/dboards/A/tx_frontends/A/filters/INT_3/value
>>> /mboards/0/dboards/A/tx_frontends/A/filters/LPF_BB
>>> /mboards/0/dboards/A/tx_frontends/A/filters/LPF_BB/value
>>> /mboards/0/dboards/A/tx_frontends/A/filters/LPF_SECONDARY
>>> /mboards/0/dboards/A/tx_frontends/A/filters/LPF_SECONDARY/value
>>> /mboards/0/dboards/A/tx_frontends/A/antenna
>>> /mboards/0/dboards/A/tx_frontends/A/antenna/options
>>> /mboards/0/dboards/A/tx_frontends/A/antenna/value
>>> /mboards/0/dboards/A/tx_frontends/B
>>> /mboards/0/dboards/A/tx_frontends/B/name
>>> /mboards/0/dboards/A/tx_frontends/B/sensors
>>> /mboards/0/dboards/A/tx_frontends/B/sensors/temp
>>> /mboards/0/dboards/A/tx_frontends/B/sensors/lo_locked
>>> /mboards/0/dboards/A/tx_frontends/B/gains
>>> /mboards/0/dboards/A/tx_frontends/B/gains/PGA
>>> /mboards/0/dboards/A/tx_frontends/B/gains/PGA/range
>>> /mboards/0/dboards/A/tx_frontends/B/gains/PGA/value
>>> /mboards/0/dboards/A/tx_frontends/B/connection
>>> /mboards/0/dboards/A/tx_frontends/B/enabled
>>> /mboards/0/dboards/A/tx_frontends/B/use_lo_offset
>>> /mboards/0/dboards/A/tx_frontends/B/bandwidth
>>> /mboards/0/dboards/A/tx_frontends/B/bandwidth/value
>>> /mboards/0/dboards/A/tx_frontends/B/bandwidth/range
>>> /mboards/0/dboards/A/tx_frontends/B/freq
>>> /mboards/0/dboards/A/tx_frontends/B/freq/range
>>> /mboards/0/dboards/A/tx_frontends/B/freq/value
>>> /mboards/0/dboards/A/tx_frontends/B/filters
>>> /mboards/0/dboards/A/tx_frontends/B/filters/FIR_1
>>> /mboards/0/dboards/A/tx_frontends/B/filters/FIR_1/value
>>> /mboards/0/dboards/A/tx_frontends/B/filters/HB_1
>>> /mboards/0/dboards/A/tx_frontends/B/filters/HB_1/value
>>> /mboards/0/dboards/A/tx_frontends/B/filters/HB_2
>>> /mboards/0/dboards/A/tx_frontends/B/filters/HB_2/value
>>> /mboards/0/dboards/A/tx_frontends/B/filters/HB_3
>>> /mboards/0/dboards/A/tx_frontends/B/filters/HB_3/value
>>> /mboards/0/dboards/A/tx_frontends/B/filters/INT_3
>>> /mboards/0/dboards/A/tx_frontends/B/filters/INT_3/value
>>> /mboards/0/dboards/A/tx_frontends/B/filters/LPF_BB
>>> /mboards/0/dboards/A/tx_frontends/B/filters/LPF_BB/value
>>> /mboards/0/dboards/A/tx_frontends/B/filters/LPF_SECONDARY
>>> /mboards/0/dboards/A/tx_frontends/B/filters/LPF_SECONDARY/value
>>> /mboards/0/dboards/A/tx_frontends/B/antenna
>>> /mboards/0/dboards/A/tx_frontends/B/antenna/options
>>> /mboards/0/dboards/A/tx_frontends/B/antenna/value
>>> /mboards/0/global_regs
>>> /mboards/0/global_regs/misc
>>> /mboards/0/global_regs/pll
>>> /mboards/0/tick_rate
>>> /mboards/0/xbar
>>> /mboards/0/xbar/Radio_0
>>> /mboards/0/xbar/Radio_0/noc_id
>>> /mboards/0/xbar/Radio_0/input_buffer_size
>>> /mboards/0/xbar/Radio_0/input_buffer_size/0
>>> /mboards/0/xbar/Radio_0/input_buffer_size/1
>>> /mboards/0/xbar/Radio_0/mtu
>>> /mboards/0/xbar/Radio_0/mtu/0
>>> /mboards/0/xbar/Radio_0/mtu/1
>>> /mboards/0/xbar/Radio_0/ports
>>> /mboards/0/xbar/Radio_0/ports/in
>>> /mboards/0/xbar/Radio_0/ports/in/0
>>> /mboards/0/xbar/Radio_0/ports/in/1
>>> /mboards/0/xbar/Radio_0/ports/out
>>> /mboards/0/xbar/Radio_0/ports/out/0
>>> /mboards/0/xbar/Radio_0/ports/out/1
>>> /mboards/0/xbar/Radio_0/args
>>> /mboards/0/xbar/Radio_0/args/0
>>> /mboards/0/xbar/Radio_0/args/0/spp
>>> /mboards/0/xbar/Radio_0/args/0/spp/type
>>> /mboards/0/xbar/Radio_0/args/0/spp/value
>>> /mboards/0/xbar/Radio_0/args/1
>>> /mboards/0/xbar/gain_0
>>> /mboards/0/xbar/gain_0/noc_id
>>> /mboards/0/xbar/gain_0/input_buffer_size
>>> /mboards/0/xbar/gain_0/input_buffer_size/0
>>> /mboards/0/xbar/gain_0/mtu
>>> /mboards/0/xbar/gain_0/mtu/0
>>> /mboards/0/xbar/gain_0/registers
>>> /mboards/0/xbar/gain_0/registers/sr
>>> /mboards/0/xbar/gain_0/registers/sr/Gain
>>> /mboards/0/xbar/gain_0/ports
>>> /mboards/0/xbar/gain_0/ports/in
>>> /mboards/0/xbar/gain_0/ports/in/0
>>> /mboards/0/xbar/gain_0/ports/out
>>> /mboards/0/xbar/gain_0/ports/out/0
>>> /mboards/0/xbar/gain_0/args
>>> /mboards/0/xbar/gain_0/args/0
>>> /mboards/0/xbar/DDC_0
>>> /mboards/0/xbar/DDC_0/noc_id
>>> /mboards/0/xbar/DDC_0/input_buffer_size
>>> /mboards/0/xbar/DDC_0/input_buffer_size/0
>>> /mboards/0/xbar/DDC_0/input_buffer_size/1
>>> /mboards/0/xbar/DDC_0/mtu
>>> /mboards/0/xbar/DDC_0/mtu/0
>>> /mboards/0/xbar/DDC_0/mtu/1
>>> /mboards/0/xbar/DDC_0/registers
>>> /mboards/0/xbar/DDC_0/registers/sr
>>> /mboards/0/xbar/DDC_0/registers/sr/N
>>> /mboards/0/xbar/DDC_0/registers/sr/M
>>> /mboards/0/xbar/DDC_0/registers/sr/CONFIG
>>> /mboards/0/xbar/DDC_0/registers/sr/DDS_FREQ
>>> /mboards/0/xbar/DDC_0/registers/sr/SCALE_IQ
>>> /mboards/0/xbar/DDC_0/registers/sr/DECIM_WORD
>>> /mboards/0/xbar/DDC_0/registers/sr/MODE
>>> /mboards/0/xbar/DDC_0/registers/sr/RELOAD
>>> /mboards/0/xbar/DDC_0/ports
>>> /mboards/0/xbar/DDC_0/ports/in
>>> /mboards/0/xbar/DDC_0/ports/in/0
>>> /mboards/0/xbar/DDC_0/ports/in/1
>>> /mboards/0/xbar/DDC_0/ports/out
>>> /mboards/0/xbar/DDC_0/ports/out/0
>>> /mboards/0/xbar/DDC_0/ports/out/1
>>> /mboards/0/xbar/DDC_0/args
>>> /mboards/0/xbar/DDC_0/args/0
>>> /mboards/0/xbar/DDC_0/args/0/freq
>>> /mboards/0/xbar/DDC_0/args/0/freq/type
>>> /mboards/0/xbar/DDC_0/args/0/freq/value
>>> /mboards/0/xbar/DDC_0/args/0/input_rate
>>> /mboards/0/xbar/DDC_0/args/0/input_rate/type
>>> /mboards/0/xbar/DDC_0/args/0/input_rate/value
>>> /mboards/0/xbar/DDC_0/args/0/output_rate
>>> /mboards/0/xbar/DDC_0/args/0/output_rate/type
>>> /mboards/0/xbar/DDC_0/args/0/output_rate/value
>>> /mboards/0/xbar/DDC_0/args/0/fullscale
>>> /mboards/0/xbar/DDC_0/args/0/fullscale/type
>>> /mboards/0/xbar/DDC_0/args/0/fullscale/value
>>> /mboards/0/xbar/DDC_0/args/0/scalar_correction
>>> /mboards/0/xbar/DDC_0/args/0/scalar_correction/type
>>> /mboards/0/xbar/DDC_0/args/0/scalar_correction/value
>>> /mboards/0/xbar/DDC_0/args/1
>>> /mboards/0/xbar/DDC_0/args/1/freq
>>> /mboards/0/xbar/DDC_0/args/1/freq/type
>>> /mboards/0/xbar/DDC_0/args/1/freq/value
>>> /mboards/0/xbar/DDC_0/args/1/input_rate
>>> /mboards/0/xbar/DDC_0/args/1/input_rate/type
>>> /mboards/0/xbar/DDC_0/args/1/input_rate/value
>>> /mboards/0/xbar/DDC_0/args/1/output_rate
>>> /mboards/0/xbar/DDC_0/args/1/output_rate/type
>>> /mboards/0/xbar/DDC_0/args/1/output_rate/value
>>> /mboards/0/xbar/DDC_0/args/1/fullscale
>>> /mboards/0/xbar/DDC_0/args/1/fullscale/type
>>> /mboards/0/xbar/DDC_0/args/1/fullscale/value
>>> /mboards/0/xbar/DDC_0/args/1/scalar_correction
>>> /mboards/0/xbar/DDC_0/args/1/scalar_correction/type
>>> /mboards/0/xbar/DDC_0/args/1/scalar_correction/value
>>> /mboards/0/xbar/DDC_0/legacy_api
>>> /mboards/0/xbar/DDC_0/legacy_api/0
>>> /mboards/0/xbar/DDC_0/legacy_api/0/rate
>>> /mboards/0/xbar/DDC_0/legacy_api/0/rate/value
>>> /mboards/0/xbar/DDC_0/legacy_api/0/rate/range
>>> /mboards/0/xbar/DDC_0/legacy_api/0/freq
>>> /mboards/0/xbar/DDC_0/legacy_api/0/freq/value
>>> /mboards/0/xbar/DDC_0/legacy_api/0/freq/range
>>> /mboards/0/xbar/DDC_0/legacy_api/1
>>> /mboards/0/xbar/DDC_0/legacy_api/1/rate
>>> /mboards/0/xbar/DDC_0/legacy_api/1/rate/value
>>> /mboards/0/xbar/DDC_0/legacy_api/1/rate/range
>>> /mboards/0/xbar/DDC_0/legacy_api/1/freq
>>> /mboards/0/xbar/DDC_0/legacy_api/1/freq/value
>>> /mboards/0/xbar/DDC_0/legacy_api/1/freq/range
>>> /mboards/0/xbar/FFT_0
>>> /mboards/0/xbar/FFT_0/noc_id
>>> /mboards/0/xbar/FFT_0/input_buffer_size
>>> /mboards/0/xbar/FFT_0/input_buffer_size/0
>>> /mboards/0/xbar/FFT_0/mtu
>>> /mboards/0/xbar/FFT_0/mtu/0
>>> /mboards/0/xbar/FFT_0/registers
>>> /mboards/0/xbar/FFT_0/registers/sr
>>> /mboards/0/xbar/FFT_0/registers/sr/FFT_RESET
>>> /mboards/0/xbar/FFT_0/registers/sr/FFT_SIZE_LOG2
>>> /mboards/0/xbar/FFT_0/registers/sr/MAGNITUDE_OUT
>>> /mboards/0/xbar/FFT_0/registers/sr/FFT_DIRECTION
>>> /mboards/0/xbar/FFT_0/registers/sr/FFT_SCALING
>>> /mboards/0/xbar/FFT_0/registers/sr/FFT_SHIFT_CONFIG
>>> /mboards/0/xbar/FFT_0/registers/rb
>>> /mboards/0/xbar/FFT_0/registers/rb/RB_FFT_RESET
>>> /mboards/0/xbar/FFT_0/registers/rb/RB_MAGNITUDE_OUT
>>> /mboards/0/xbar/FFT_0/registers/rb/RB_FFT_SIZE_LOG2
>>> /mboards/0/xbar/FFT_0/registers/rb/RB_FFT_DIRECTION
>>> /mboards/0/xbar/FFT_0/registers/rb/RB_FFT_SCALING
>>> /mboards/0/xbar/FFT_0/registers/rb/RB_FFT_SHIFT_CONFIG
>>> /mboards/0/xbar/FFT_0/ports
>>> /mboards/0/xbar/FFT_0/ports/in
>>> /mboards/0/xbar/FFT_0/ports/in/0
>>> /mboards/0/xbar/FFT_0/ports/out
>>> /mboards/0/xbar/FFT_0/ports/out/0
>>> /mboards/0/xbar/FFT_0/args
>>> /mboards/0/xbar/FFT_0/args/0
>>> /mboards/0/xbar/FFT_0/args/0/spp
>>> /mboards/0/xbar/FFT_0/args/0/spp/type
>>> /mboards/0/xbar/FFT_0/args/0/spp/value
>>> /mboards/0/xbar/FFT_0/args/0/shift
>>> /mboards/0/xbar/FFT_0/args/0/shift/type
>>> /mboards/0/xbar/FFT_0/args/0/shift/value
>>> /mboards/0/xbar/FFT_0/args/0/direction
>>> /mboards/0/xbar/FFT_0/args/0/direction/type
>>> /mboards/0/xbar/FFT_0/args/0/direction/value
>>> /mboards/0/xbar/FFT_0/args/0/scaling
>>> /mboards/0/xbar/FFT_0/args/0/scaling/type
>>> /mboards/0/xbar/FFT_0/args/0/scaling/value
>>> /mboards/0/xbar/FFT_0/args/0/otype
>>> /mboards/0/xbar/FFT_0/args/0/otype/type
>>> /mboards/0/xbar/FFT_0/args/0/otype/value
>>> /mboards/0/xbar/FFT_0/args/0/reset
>>> /mboards/0/xbar/FFT_0/args/0/reset/type
>>> /mboards/0/xbar/FFT_0/args/0/reset/value
>>> /mboards/0/xbar/FFT_0/args/0/magnitude_out
>>> /mboards/0/xbar/FFT_0/args/0/magnitude_out/type
>>> /mboards/0/xbar/FFT_0/args/0/magnitude_out/value
>>> /mboards/0/time
>>> /mboards/0/time/now
>>> /mboards/0/time/pps
>>> /mboards/0/time/cmd
>>> /mboards/0/time_source
>>> /mboards/0/time_source/value
>>> /mboards/0/time_source/options
>>> /mboards/0/rx_codecs
>>> /mboards/0/rx_codecs/A
>>> /mboards/0/rx_codecs/A/name
>>> /mboards/0/rx_codecs/A/gains
>>> /mboards/0/tx_codecs
>>> /mboards/0/tx_codecs/A
>>> /mboards/0/tx_codecs/A/name
>>> /mboards/0/tx_codecs/A/gains
>>> /mboards/0/gpio
>>> /mboards/0/gpio/INT0
>>> /mboards/0/gpio/INT0/SRC
>>> /mboards/0/gpio/INT0/CTRL
>>> /mboards/0/gpio/INT0/DDR
>>> /mboards/0/gpio/INT0/OUT
>>> /mboards/0/gpio/INT0/ATR_0X
>>> /mboards/0/gpio/INT0/ATR_RX
>>> /mboards/0/gpio/INT0/ATR_TX
>>> /mboards/0/gpio/INT0/ATR_XX
>>> /mboards/0/gpio/INT0/READBACK
>>> /mboards/0/rx_dsps
>>> /mboards/0/rx_dsps/0
>>> /mboards/0/rx_dsps/0/stream_cmd
>>> /mboards/0/rx_dsps/0/freq
>>> /mboards/0/rx_dsps/0/freq/value
>>> /mboards/0/rx_dsps/0/freq/range
>>> /mboards/0/rx_dsps/0/rate
>>> /mboards/0/rx_dsps/0/rate/value
>>> /mboards/0/rx_dsps/1
>>> /mboards/0/rx_dsps/1/stream_cmd
>>> /mboards/0/rx_dsps/1/freq
>>> /mboards/0/rx_dsps/1/freq/value
>>> /mboards/0/rx_dsps/1/freq/range
>>> /mboards/0/rx_dsps/1/rate
>>> /mboards/0/rx_dsps/1/rate/value
>>> /mboards/0/tx_dsps
>>> /mboards/0/tx_dsps/0
>>> /mboards/0/tx_dsps/0/freq
>>> /mboards/0/tx_dsps/0/freq/value
>>> /mboards/0/tx_dsps/0/freq/range
>>> /mboards/0/tx_dsps/0/rate
>>> /mboards/0/tx_dsps/0/rate/value
>>> /mboards/0/tx_dsps/1
>>> /mboards/0/tx_dsps/1/freq
>>> /mboards/0/tx_dsps/1/freq/value
>>> /mboards/0/tx_dsps/1/freq/range
>>> /mboards/0/tx_dsps/1/rate
>>> /mboards/0/tx_dsps/1/rate/value
>>> /mboards/0/rx_subdev_spec
>>> /mboards/0/tx_subdev_spec
>>> [INFO] [E300] Loading FPGA image:
>>> /home/root/newinstall/usr/share/uhd/images/usrp_e3xx_fpga_idle_sg3.bit...
>>> [INFO] [E300] FPGA image loaded
>>>
>>> The failure output I got from running the python script shows that it
>>> can't find "/mboards/0/xbar/gain_0/args/0/gain/value" and when I look at
>>> the tree, there is no value instantiated by the probe. It only looks like
>>> the furthest that the probe goes down in the mboards is
>>> "/mboards/0/xbar/gain_0/args/0". I am assuming its something in the
>>> arguments file not getting loaded, but everything appears ok to me on
>>> glance in that XML file.
>>>
>>> Regards,
>>> Jon
>>>
>>> On Thu, Nov 21, 2019 at 4:49 PM EJ Kreinar <ejkrei...@gmail.com> wrote:
>>>
>>>> Okay, great...
>>>>
>>>> You might want to try increasing the log level. Export
>>>> UHD_LOG_CONSOLE_LEVEL=trace or debug and try to make sure the correct xml
>>>> file is getting applied to the block correctly.
>>>>
>>>> There's also something like a "--tree" parameter in the uhd_usrp_probe
>>>> so try running the probe with the tree option to print out the device tree
>>>> and look for the arguments assigned to your new block.
>>>>
>>>> Let's see if any of that helps figure out what's going on...
>>>> EJ
>>>>
>>>> On Thu, Nov 21, 2019, 4:01 PM Jonathan Lockhart <jlockhar...@gmail.com>
>>>> wrote:
>>>>
>>>>> Also, when I compiled from the OOT directory for ARM, I used this
>>>>> command, which I pieced together from the RFNoC build guide, and the
>>>>> release-4 guide for cross-compiling gr-ettus.
>>>>>
>>>>> cmake
>>>>> -DCMAKE_TOOLCHAIN_FILE=~/rfnoc/src/gnuradio/cmake/Toolchains/oe-sdk_cross.cmake
>>>>> -DCMAKE_INSTALL_PREFIX=/usr
>>>>> -DUHD_FPGA_DIR="/home/jon/rfnoc/src/uhd/fpga-src/" ../
>>>>>
>>>>> Regards,
>>>>> Jon
>>>>>
>>>>> On Thu, Nov 21, 2019 at 3:48 PM Jonathan Lockhart <
>>>>> jlockhar...@gmail.com> wrote:
>>>>>
>>>>>> Greetings EJ,
>>>>>>
>>>>>> So, from the tutorial, they have you edit the gain.xml file, and this
>>>>>> is what I have for it.
>>>>>>
>>>>>> <?xml version="1.0"?>
>>>>>> <!--Default XML file-->
>>>>>> <nocblock>
>>>>>> <name>gain</name>
>>>>>> <blockname>gain</blockname>
>>>>>> <ids>
>>>>>> <id revision="0">B7DD64941A952AAC</id>
>>>>>> </ids>
>>>>>> <!-- Registers -->
>>>>>> <registers>
>>>>>> <setreg>
>>>>>> <name>Gain</name>
>>>>>> <address>128</address>
>>>>>> </setreg>
>>>>>> </registers>
>>>>>> <!-- Args -->
>>>>>> <args>
>>>>>> <args>
>>>>>> <name>gain</name>
>>>>>> <type>double</type>
>>>>>> <value>1.0</value>
>>>>>> <check>GE($gain, 0.0) AND LE($gain, 32767.0)</check>
>>>>>> <check_message>Invalid Gain!</check_message>
>>>>>> <action>
>>>>>> SR_WRITE("GAIN", IROUND($gain))
>>>>>> </action>
>>>>>> </args>
>>>>>> </args>
>>>>>> <!--One input, one output. If this is used, better have all the
>>>>>> info the C++ file.-->
>>>>>> <ports>
>>>>>> <sink>
>>>>>> <name>in0</name>
>>>>>> <type>sc16</name>
>>>>>> </sink>
>>>>>> <source>
>>>>>> <name>out0</name>
>>>>>> <type>sc16</name>
>>>>>> </source>
>>>>>> </ports>
>>>>>> </nocblock>
>>>>>>
>>>>>> There is an args value and it is declared as gain.
>>>>>>
>>>>>> So from there, I followed your second suggestion and tried to find
>>>>>> where it was installed when I did the cross compile. It was not placed in
>>>>>> the "GRC_BLOCKS_PATH" of "/share/gnuradio/grc/blocks" like the default
>>>>>> RFNoC blocks. It was instead placed in "/share/uhd/rfnoc/bocks" so I
>>>>>> added
>>>>>> that to the setup.env file, included below.
>>>>>>
>>>>>> LOCALPREFIX=~/newinstall/usr
>>>>>> export PATH=$LOCALPREFIX/bin:$PATH
>>>>>> export LD_LOAD_LIBRARY=$LOCALPREFIX/lib:$LD_LOAD_LIBRARY
>>>>>> export LD_LIBRARY_PATH=$LOCALPREFIX/lib:$LD_LIBRARY_PATH
>>>>>> export PYTHONPATH=$LOCALPREFIX/lib/python2.7/site-packages:$PYTHONPATH
>>>>>> export PKG_CONFIG_PATH=$LOCALPREFIX/lib/pkgconfig:$PKG_CONFIG_PATH
>>>>>> export
>>>>>> GRC_BLOCKS_PATH=$LOCALPREFIX/share/gnuradio/grc/blocks:$GRC_BLOCKS_PATH
>>>>>> export UHD_RFNOC_DIR=$LOCALPREFIX/share/uhd/rfnoc/
>>>>>> export UHD_IMAGES_DIR=$LOCALPREFIX/share/uhd/images
>>>>>> export
>>>>>> GRC_BLOCKS_PATH=$LOCALPREFIX/share/uhd/rfnoc/blocks:$GRC_BLOCKS_PATH
>>>>>>
>>>>>> Unfortunately, after re-sourcing the setup.env, I still get the same
>>>>>> message.
>>>>>>
>>>>>> File "rfnoc_myGain_usrp.py", line 223, in <module>
>>>>>> main()
>>>>>> File "rfnoc_myGain_usrp.py", line 212, in main
>>>>>> tb = top_block_cls(fpga_path=options.fpga_path,
>>>>>> rx_gain=options.rx_gain, rx_digital_gain=options.rx_digital_gain,
>>>>>> rx_freq=options.rx_freq, host_ip_addr=options.host_ip_addr)
>>>>>> File "rfnoc_myGain_usrp.py", line 117, in __init__
>>>>>> self.tutorial_gain_0.set_arg("gain", rx_digital_gain)
>>>>>> File
>>>>>> "/home/root/newinstall/usr/lib/python2.7/site-packages/tutorial/tutorial_swig.py",
>>>>>> line 315, in set_arg
>>>>>> return _tutorial_swig.gain_sptr_set_arg(self, *args)
>>>>>> RuntimeError: LookupError: Path not found in tree:
>>>>>> /mboards/0/xbar/gain_0/args/0/gain/value
>>>>>>
>>>>>> I looked at some of your examples (which have been very helpful to
>>>>>> get me this far) from what I believe is your github someone linked me.
>>>>>> Everything appears to match what it should, for what gain is trying to
>>>>>> accomplish.
>>>>>>
>>>>>> Regards,
>>>>>> Jon
>>>>>>
>>>>>> On Thu, Nov 21, 2019 at 3:27 PM EJ Kreinar <ejkrei...@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi Jon,
>>>>>>>
>>>>>>> The rfnoc "nocscript" xml definition can create arguments and attach
>>>>>>> to the device tree like you are trying to set there (it's not compiled
>>>>>>> directly, but rather created dynamically from the xml definition)
>>>>>>>
>>>>>>> Recommended debugging...
>>>>>>> 1. Check your OOT gain block xml (in rfnoc/blocks) and make sure it
>>>>>>> has a "gain" field in the "args" list. You'll also want to make sure it
>>>>>>> writes your desired register, but I don't think you're even getting
>>>>>>> that far
>>>>>>> 2. Make sure the block xml is installed on the e310 embedded prefix
>>>>>>> and is found at run time during uhd_usrp_probe and when running your
>>>>>>> application. If it's not in the right place or not attaching to your
>>>>>>> block
>>>>>>> then it won't create the gain argument
>>>>>>>
>>>>>>> I'm guessing it's one of those two possibilities...
>>>>>>> EJ
>>>>>>>
>>>>>>> On Thu, Nov 21, 2019, 3:19 PM Jonathan Lockhart via USRP-users <
>>>>>>> usrp-users@lists.ettus.com> wrote:
>>>>>>>
>>>>>>>> Greetings,
>>>>>>>>
>>>>>>>> I was able to get the ARM cross compile working. I removed the
>>>>>>>> build directory and re-sourced the dev environment and then the
>>>>>>>> cross-compile used the -mfloar=hard flag. Not sure what caused the
>>>>>>>> issue
>>>>>>>> earlier and why it wasn't picking it up.
>>>>>>>>
>>>>>>>> Now I have a different issue. So I have completed this guide:
>>>>>>>> https://kb.ettus.com/Getting_Started_with_RFNoC_Development
>>>>>>>>
>>>>>>>> I modified the GNURadio just a bit so that the output from gain was
>>>>>>>> placed on a ZMQ push, and the graphics were on the host to graph the
>>>>>>>> signal
>>>>>>>> (seen in the screenshots below).
>>>>>>>>
>>>>>>>> [image: Screenshot from 2019-11-21 15-06-33.jpg]
>>>>>>>>
>>>>>>>> [image: Screenshot from 2019-11-21 15-010-44.jpg]
>>>>>>>>
>>>>>>>> However, when I run the top file for the USRP, I am running into
>>>>>>>> this error.
>>>>>>>>
>>>>>>>> Traceback (most recent call last):
>>>>>>>> File "rfnoc_myGain_usrp.py", line 223, in <module>
>>>>>>>> main()
>>>>>>>> File "rfnoc_myGain_usrp.py", line 212, in main
>>>>>>>> tb = top_block_cls(fpga_path=options.fpga_path,
>>>>>>>> rx_gain=options.rx_gain, rx_digital_gain=options.rx_digital_gain,
>>>>>>>> rx_freq=options.rx_freq, host_ip_addr=options.host_ip_addr)
>>>>>>>> File "rfnoc_myGain_usrp.py", line 117, in __init__
>>>>>>>> self.tutorial_gain_0.set_arg("gain", rx_digital_gain)
>>>>>>>> File
>>>>>>>> "/home/root/newinstall/usr/lib/python2.7/site-packages/tutorial/tutorial_swig.py",
>>>>>>>> line 315, in set_arg
>>>>>>>> return _tutorial_swig.gain_sptr_set_arg(self, *args)
>>>>>>>> RuntimeError: LookupError: Path not found in tree:
>>>>>>>> /mboards/0/xbar/gain_0/args/0/gain/value
>>>>>>>>
>>>>>>>> No where else in building GNURadio scripts and .bit files does this
>>>>>>>> "/mboards" arise, and I have looked through my verilog file for gain
>>>>>>>> (gain.v) and it is correct per the instructions in the linked guide,
>>>>>>>> and I
>>>>>>>> built the python and gnuradio hook exactly as the instructions stated
>>>>>>>> to.
>>>>>>>>
>>>>>>>> Anyone have an troubleshooting ideas b/c I am currently at a loss.
>>>>>>>> It did past the test bench they have you build with no issues.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Jon
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Nov 20, 2019 at 3:21 PM Jonathan Lockhart <
>>>>>>>> jlockhar...@gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Greetings,
>>>>>>>>>
>>>>>>>>> I am having some issues completing the RFNOC build tutorial on the
>>>>>>>>> Ettus E312. The reference documentation is using an X3xx series
>>>>>>>>> radio, and
>>>>>>>>> from the final python script it appears to be running the GNR script
>>>>>>>>> natively on the host. I built the exact script from the KB but when
>>>>>>>>> running
>>>>>>>>> on the radio it fails stating it can't "import tutorial." I realized
>>>>>>>>> all
>>>>>>>>> the files that were installed were placed on the host but not cross
>>>>>>>>> compiled for the E3xx using the SDK and ARM cross compile tool. I
>>>>>>>>> tried to
>>>>>>>>> complete this task, but unfortunately the compilation dies here.
>>>>>>>>>
>>>>>>>>> /home/jon/rfnoc/oe/sysroots/armv7ahf-vfp-neon-oe-linux-gnueabi/usr/include/gnu/stubs.h:7:11:
>>>>>>>>> fatal error: gnu/stubs-soft.h: No such file or directory
>>>>>>>>> # include <gnu/stubs-soft.h>
>>>>>>>>> ^~~~~~~~~~~~~~~~~~
>>>>>>>>> compilation terminated.
>>>>>>>>>
>>>>>>>>> Now I did find the stubs-soft.h file in the libc6-dev-armel-cross
>>>>>>>>> in the apt repo. I installed it and tried to cp the file into the
>>>>>>>>> /home/jon/rfnoc/oe/sysroots/armv7ahf-vfp-neon-oe-linux-gnueabi/usr/include/gnu/
>>>>>>>>> location but it still doesn't like that. I verified that on my echo
>>>>>>>>> $CC
>>>>>>>>> that the -mfloat is set to hard as shown here.
>>>>>>>>>
>>>>>>>>> jon@jon-OptiPlex-9020:~/rfnoc/src/rfnoc-tutorial$ echo $CC
>>>>>>>>> arm-oe-linux-gnueabi-gcc -march=armv7-a -mfloat-abi=hard
>>>>>>>>> -mfpu=neon
>>>>>>>>> --sysroot=/home/jon/rfnoc/oe/sysroots/armv7ahf-vfp-neon-oe-linux-gnueabi
>>>>>>>>>
>>>>>>>>> So I am not sure why the gain module in the tutorial is looking
>>>>>>>>> for the soft file.
>>>>>>>>>
>>>>>>>>> If anyone has experience in porting their OOT modules over to the
>>>>>>>>> E-series of radios I would appreciate the help.
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Jon
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> USRP-users mailing list
>>>>>>>> USRP-users@lists.ettus.com
>>>>>>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>>>>>>>
>>>>>>>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
