Greetings Brian,
I had noticed that the script was set to use the X300 after I sent the
email. I switched in the CMakeList.txt file to use the e300 repo, which is
using the Zynq-7020, which is included in the webpack version of Vivado. I
unfortunately got the same error prior to the change, included below.
ettus_sdr@ettus-VirtualBox:~/rfnoc/src/rfnoc-tutorial/build$ make
noc_block_gain_tb
Setting up a 64-bit FPGA build environment for the USRP-E3x0...
- Vivado: Found (/opt/Xilinx/Vivado/2017.4/bin)
Environment successfully initialized.
BUILDER: Checking tools...
* GNU bash, version 4.4.20(1)-release (x86_64-pc-linux-gnu)
* Python 2.7.15+
* Vivado v2017.4.1 (64-bit)
****** Vivado v2017.4.1 (64-bit)
**** SW Build 2117270 on Tue Jan 30 15:31:13 MST 2018
**** IP Build 2095745 on Tue Jan 30 17:13:15 MST 2018
** Copyright 1986-2017 Xilinx, Inc. All Rights Reserved.
CRITICAL WARNING: [Common 17-741] No write access right to the local Tcl
store at '/home/ettus_sdr/.Xilinx/Vivado/2017.4/XilinxTclStore'.
XilinxTclStore is reverted to the installation area. If you want to use
local Tcl Store, please change the access right and relaunch Vivado.
source
/home/ettus_sdr/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_sim_project.tcl
# set simulator $::env(VIV_SIMULATOR)
# set design_srcs $::env(VIV_DESIGN_SRCS)
# set sim_srcs $::env(VIV_SIM_SRCS)
# set inc_srcs $::env(VIV_INC_SRCS)
# set sim_top $::env(VIV_SIM_TOP)
# set part_name $::env(VIV_PART_NAME)
# set sim_runtime $::env(VIV_SIM_RUNTIME)
# set sim_fast $::env(VIV_SIM_FAST)
# set vivado_mode $::env(VIV_MODE)
# set working_dir [pwd]
# set sim_fileset "sim_1"
# set project_name "[string tolower $simulator]_proj"
# if [info exists ::env(VIV_SIM_COMPLIBDIR) ] {
# set sim_complibdir $::env(VIV_SIM_COMPLIBDIR)
# if [expr [file isdirectory $sim_complibdir] == 0] {
# set sim_complibdir ""
# }
# } else {
# set sim_complibdir ""
# }
# if [expr ([string equal $simulator "XSim"] == 0) && ([string length
$sim_complibdir] == 0)] {
# puts "BUILDER: \[ERROR\]: Could not resolve the location for the
compiled simulation libraries."
# puts " Please build libraries for chosen simulator
and set the env or"
# puts " makefile variable SIM_COMPLIBDIR to point to
the location."
# exit 1
# }
# puts "BUILDER: Creating Vivado simulation project part $part_name"
BUILDER: Creating Vivado simulation project part xc7k410tffg900-2
# create_project -part $part_name -force $project_name/$project_name
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
INFO: [Common 17-206] Exiting Vivado at Wed Nov 13 11:07:09 2019...
/home/ettus_sdr/rfnoc/src/uhd/fpga-src/usrp3/top/../tools/make/viv_simulator.mak:51:
recipe for target 'xsim' failed
make[4]: *** [xsim] Error 1
CMakeFiles/noc_block_gain_tb.dir/build.make:57: recipe for target
'CMakeFiles/noc_block_gain_tb' failed
make[3]: *** [CMakeFiles/noc_block_gain_tb] Error 2
CMakeFiles/Makefile2:131: recipe for target
'CMakeFiles/noc_block_gain_tb.dir/all' failed
make[2]: *** [CMakeFiles/noc_block_gain_tb.dir/all] Error 2
CMakeFiles/Makefile2:138: recipe for target
'CMakeFiles/noc_block_gain_tb.dir/rule' failed
make[1]: *** [CMakeFiles/noc_block_gain_tb.dir/rule] Error 2
Makefile:201: recipe for target 'noc_block_gain_tb' failed
make: *** [noc_block_gain_tb] Error 2
I am assuming this is the part that needs to be changed: xc7k410tffg900-2.
I am not seeing where this is declared in the CMakeList.txt file. Do you
know where I would go about changing it in the build scripts?
Regards,
Jon
On Wed, Nov 13, 2019 at 11:12 AM Brian Padalino <bpadal...@gmail.com> wrote:
> On Wed, Nov 13, 2019 at 10:54 AM Jonathan Lockhart via USRP-users <
> usrp-users@lists.ettus.com> wrote:
>
>> Greetings USRP Users,
>>
>> I am having another issue with the UHD-3.14 build I can't seem to shake
>> down. I have been going through this guide on the KB to learn how to use
>> the rfnocmodtool to build new modules for my E312:
>>
>> https://kb.ettus.com/Getting_Started_with_RFNoC_Development
>>
>> Unfortunately, when I get to the point of using the test bench, I get the
>> following error.
>>
>> ettus_sdr@ettus-VirtualBox:~/rfnoc/src/rfnoc-tutorial/build$ sudo make
>> noc_block_gain_tb
>> [sudo] password for ettus_sdr:
>> Setting up a 64-bit FPGA build environment for the USRP-X3x0...
>> - Vivado: Found (/opt/Xilinx/Vivado/2017.4/bin)
>>
>> Environment successfully initialized.
>> BUILDER: Checking tools...
>> * GNU bash, version 4.4.20(1)-release (x86_64-pc-linux-gnu)
>> * Python 2.7.15+
>> * Vivado v2017.4.1 (64-bit)
>>
>> ****** Vivado v2017.4.1 (64-bit)
>> **** SW Build 2117270 on Tue Jan 30 15:31:13 MST 2018
>> **** IP Build 2095745 on Tue Jan 30 17:13:15 MST 2018
>> ** Copyright 1986-2017 Xilinx, Inc. All Rights Reserved.
>>
>> source
>> /home/ettus_sdr/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_sim_project.tcl
>> # set simulator $::env(VIV_SIMULATOR)
>> # set design_srcs $::env(VIV_DESIGN_SRCS)
>> # set sim_srcs $::env(VIV_SIM_SRCS)
>> # set inc_srcs $::env(VIV_INC_SRCS)
>> # set sim_top $::env(VIV_SIM_TOP)
>> # set part_name $::env(VIV_PART_NAME)
>> # set sim_runtime $::env(VIV_SIM_RUNTIME)
>> # set sim_fast $::env(VIV_SIM_FAST)
>> # set vivado_mode $::env(VIV_MODE)
>> # set working_dir [pwd]
>> # set sim_fileset "sim_1"
>> # set project_name "[string tolower $simulator]_proj"
>> # if [info exists ::env(VIV_SIM_COMPLIBDIR) ] {
>> # set sim_complibdir $::env(VIV_SIM_COMPLIBDIR)
>> # if [expr [file isdirectory $sim_complibdir] == 0] {
>> # set sim_complibdir ""
>> # }
>> # } else {
>> # set sim_complibdir ""
>> # }
>> # if [expr ([string equal $simulator "XSim"] == 0) && ([string length
>> $sim_complibdir] == 0)] {
>> # puts "BUILDER: \[ERROR\]: Could not resolve the location for the
>> compiled simulation libraries."
>> # puts " Please build libraries for chosen simulator
>> and set the env or"
>> # puts " makefile variable SIM_COMPLIBDIR to point
>> to the location."
>> # exit 1
>> # }
>> # puts "BUILDER: Creating Vivado simulation project part $part_name"
>> BUILDER: Creating Vivado simulation project part xc7k410tffg900-2
>> # create_project -part $part_name -force $project_name/$project_name
>> WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
>> ERROR: [Coretcl 2-106] Specified part could not be found.
>>
>
> It's a silly question, but do you have a license for the kintex 7 410T
> part on that machine?
>
> You can probably get around this by targeting something that is supported
> by the free web pack as long as it's 7-series fabric (zynq 7020 had worked
> for me in the past).
>
> Brian
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
