I'm trying to take what I learned from GRCon2019 from Neel and company's
workshop, and I'm trying to perform the uhd_image_builder_gui.py script. It
fails with a message similar to:
[00:12:22] Starting DRC Task
ERROR: [DRC MDRV-1] Multiple Driver Nets: Net bus_clk_gen/inst/CLK_OUT4 has
multiple drivers: radio_clk_gen/inst/clkout1_buf/O, and bus_clk_gen/
inst/clkout4_buf/O.
ERROR: [DRC MDRV-1] Multiple Driver Nets: Net
radio_reset_sync/reset_double_sync/synchronizer_false_path/value[9]_9 has
multiple drivers: ce_res
et_sync/reset_double_sync/synchronizer_false_path/stages[9].value_reg[9][0]/Q,
and radio_reset_sync/reset_double_sync/synchronizer_false_path/st
ages[9].value_reg[9][0]/Q.
ERROR: [Vivado_Tcl 4-78] Error(s) found during DRC. Opt_design not run.
I have to finish the paperwork to get the real log out of my lab so I can post
it, but it looked pretty much the same as the log in the unanswered archived
message at:
http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/2019-August/060443.html
and I wanted to try and get a jumpstart on the issue.
I have an X310
Vivado 2018.3
Jeff
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
