Apologies, the instruction document I’m following is “USRP_Hardware Driver and USRP Manual: USDRP2 and N2x0 Series” not what is mentioned below.
Joe > On May 8, 2019, at 9:11 AM, Joe Martin <joe.martin.k...@gmail.com> wrote: > > I am trying to bring an elderly N210 r2.0 with unknown history to life by > loading current UHD firmware and fpga images from a 1Gigabit ethernet > connection on an AMD 2950X, 3.4GHz, 2TB SSD PC running Ubuntu 18.04 with UHD > 3.14.0.HEAD-0-gd20a7ae2 software but having difficulty. > > Following instructions in “USRP Hardware Driver and USRP Manual: Internal > GPSDO (USRP-N2x0/E1X0 Models)”: > > My initial action was to load the “usrp_n210_r4_fpga.bit" file into the N210 > xc3sd3400a FPGA using a Xilinx Platform Cable USB II JTAG programming cable > from a Win7 PC running Xilinx ISE iMPACT, which reported “Program Succeeded” > for the action. Ethernet LEDs on the N210 are variously lighted showing > activity on the connection port. > > With the N210 connected to the Linux PC 1Gbps ethernet port, issuing the > following commands result in the responses shown in the screenshot image > below: > > <Screenshot from 2019-05-08 08-46-52.png> > > My (naive!) interpretation of the above responses is that the FPGA may not > actually have been programmed with the *.bit code even though iMPACT reported > success in programming. Can someone assist me in understanding whether my > interpretation is correct or not and, most importantly, suggest what I might > try next to bring this N210 to life? > > The “Please run:” suggestion results in the “Received invalid reply 32 from > device” error. It seems no matter what I try the “Received invalid reply 32 > from device” RuntimeError is reported back when I try to load any new > firmware/FPGA images. > > Thanks! > > Joe > _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
