Hi Chris You are right. This seems like a bug on E320. We are working on fixing it and will have an update for you soon.
Regards Sugandha On Mon, May 6, 2019 at 10:12 PM Chris Gobbett via USRP-users < usrp-users@lists.ettus.com> wrote: > Following the steps from the E320 getting started guide [1], I'm not > having any luck with the unit auto booting when power is applied > > The command "eeprom-set-flags 0x1" seems to take effect successfully, and > sets the value of MCU_FLAGS[0] to 0x1 (noting that the default value is > 0x8, which I'm assuming means auto boot is "off") . This is also verified > as holding its value between power cycles, by looking at the output of the > eeprom-dump command. > > But... removing power to the unit, then applying power again doesn't > result in the unit booting by itself. > > Anyone had any experience with this and/or able to offer help? I'm > hesitant to trial-and-error different values into eeprom-set-flags, for > fear of breaking something... :) > > Cheers, > Chris > > > [1] https://kb.ettus.com/E320_Getting_Started_Guide > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > -- Sugandha Gupta Senior Software Engineer Ettus Research, a National Instruments Brand
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
