Following the steps from the E320 getting started guide [1], I'm not having any luck with the unit auto booting when power is applied The command "eeprom-set-flags 0x1" seems to take effect successfully, and sets the value of MCU_FLAGS[0] to 0x1 (noting that the default value is 0x8, which I'm assuming means auto boot is "off") . This is also verified as holding its value between power cycles, by looking at the output of the eeprom-dump command.
But... removing power to the unit, then applying power again doesn't result in the unit booting by itself. Anyone had any experience with this and/or able to offer help? I'm hesitant to trial-and-error different values into eeprom-set-flags, for fear of breaking something... :) Cheers,Chris [1] https://kb.ettus.com/E320_Getting_Started_Guide [1] Links: ------ [1] https://kb.ettus.com/E320_Getting_Started_Guide
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
