@Marcus Muller
What are the settings of usrp_spectrum_sense that you use?
Sampling rate :16e6Min_freq 2.4e9max_freq 2.5e9BW 15.625e3 Hz
FFT 1024
Rensi
On Monday, 6 May, 2019, 1:20:20 am IST, Marcus Müller
<marcus.muel...@ettus.com> wrote:
So, what are the options with which you run usrp_spectrum_sense?
On Sun, 2019-05-05 at 19:23 +0000, Rensi Mathew via USRP-users wrote:
> Yes USB 3.0.
>
> The OS is Ubuntu 16.04 LTS 64-bit
> Intel® Core™ i5-4570 CPU @ 3.20GHz × 4
> Disk 309.6 GB
> Memory 3.6 GiB
>
> Could it because of memory problem?
> The yellow/orange light in the system blinks when USRP runs(showing
> heavily loaded).
>
> Rensi
> On Saturday, 4 May, 2019, 10:09:03 am IST, Robin Coxe <
> robin.c...@ettus.com> wrote:
>
>
> Are you using USB 3.0? USB 2.0 will max out at about 8 Ms/s.
>
>
>
> Robin Coxe | Chief R&D Program Manager, SDR | Santa Clara, CA |
> 408.610.6363
>
> From: USRP-users <usrp-users-boun...@lists.ettus.com> on behalf of
> Rensi Mathew via USRP-users <usrp-users@lists.ettus.com>
> Sent: Friday, May 3, 2019 9:17 PM
> To: Vsr Ravi via USRP-users
> Subject: [USRP-users] B200 Overrun
>
> Dear sir
> I am using B200 SDR to run the program usrp_spectrum_sense.py with a
> sampling frequency of 16e6.
> I think I am using a fairly low sampling rate.
> Still I am getting some 'OOOO'.
>
> Could someone tell me the possible reasons for the same? And how I
> can avoid the same?
>
> Thanking you
> Rensi Sam
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
