On 04/25/2019 04:26 PM, VINAYAK KARANDIKAR via USRP-users wrote:
Hello everyone,
Is there a method available to establish
the IP address of the USRP you are using? If so can someone tell me
the procedure. I am using an NI device by the way, not an Ettus device.
Here's the top of the X310 documentation tree--I believe you have a
2954R? It's just an X310 with a pair of UBX-160 cards and a built-in
GPSDO:
https://files.ettus.com/manual/page_usrp_x3x0.html
Also since apparently i am advised to match the IP address of my
USRP(For the laptop to be able to detect the USRP device) with the
Host address (MY Laptop IP address, i reckon), can someone tell me the
procedure as to how to achieve this?
That is true of ANY IP device, whether it's a USRP or a toaster--if you
have a dedicated piece of wire between your computer and the device
(as Ettus *strongly recommends*) then your computers ethernet port
and the USRP have to be on the same IP subnet in order for it to be
reachable, and again, that's not something peculiar to a USRP.
Thanks a lot,
Vinayak Anant Karandikar
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
