Hello all, I have an B205mini board and I'm interested in modifying the internal TX block of the FPGA, to be an standalone signal generator.
I created a custom block that generates a signal, in this case a pulse generator, with the two components of 12 bits for I and Q. Then I connect these two components into b205_io's tx_i0 y rx_i0. I use the radio_clk as clock to generate samples of the signal. Finally I remake the binary files of the FPGA and I reprogram the B205mini, but when I use the Spectrum Analyzer I don't have any signal on the TX frequency. I don't know if I have to change the clock for generation of samples or activate another signal. Could someone give me an advice to achieve custom transmission from the FPGA? Thanks you. Best regards, Diego ________________________________ Este correo electr?nico y, en su caso, cualquier fichero anexo al mismo, contiene informaci?n de car?cter confidencial exclusivamente dirigida a su destinatario o destinatarios. Si no es vd. el destinatario indicado, queda notificado que la lectura, utilizaci?n, divulgaci?n y/o copia sin autorizaci?n est? prohibida en virtud de la legislaci?n vigente. En el caso de haber recibido este correo electr?nico por error, se ruega notificar inmediatamente esta circunstancia mediante reenv?o a la direcci?n electr?nica del remitente. Evite imprimir este mensaje si no es estrictamente necesario. This email and any file attached to it (when applicable) contain(s) confidential information that is exclusively addressed to its recipient(s). If you are not the indicated recipient, you are informed that reading, using, disseminating and/or copying it without authorisation is forbidden in accordance with the legislation in effect. If you have received this email by mistake, please immediately notify the sender of the situation by resending it to their email address. Avoid printing this message if it is not absolutely necessary.
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
