This was super enlightening, thanks! Pointers to any other posts like this would be useful.
Cheers, Jules On Tue, 26 Mar 2019 at 03:35, Nick Foster <bistrom...@gmail.com> wrote: > I wrote a blog post a while back describing a RX->TX RFNoC loopback > application. It should still apply to the latest UHD: > > https://corvid.io/2017/04/22/stupid-rfnoc-tricks-loopback/ > > Nick > > On Sun, Mar 24, 2019 at 5:33 PM Julius Baxter via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> Hi all, >> >> I have a couple of quick questions. >> >> I have an N310 and intend to build a system which doesn't involve passing >> the stream through a host - ie. I want to add a CE or two which will handle >> Rx and generate samples for Tx. Has anyone done this, are there any >> pointers? I presume the host will still be involved to configure the blocks >> (radio, ddc, duc, etc.). Can I still use the Python USRP API to do this >> config? >> >> Is there anything complementing the Ettus KB on the RFNoC internals? I've >> seen some posts referencing what parameters on various blocks do, and other >> nuggets of knowledge regarding building CEs for RFNoC. Is there a >> centralised place for details on how RFNoC works, or is reading the RTL and >> this ml the best source of info? >> >> Thanks, >> Jules >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
