Can you elaborate on what "not coherent" means to you – the relative phase should be constant after each tune, but if you don't tune simultaneously, i.e. with timed commands, random at each tune.
Best regards, Marcus On Sat, 2019-03-23 at 17:06 -0400, Michael R. Freedman via USRP-users wrote: > Hello, > > > I have an issue where I tune both the TX and RX side of a UBX40 card > in > an X310 to the same frequency and find that the transmitted signal > and > what is received are not coherent. I am using an external 10MHz > reference and have tried the documented suggestions. > > at 150MHz it is coherent. > > at 155MHz it is NOT coherent. > > > I have tried setting the dboard_clock_rate to 20MHz. This made the > problem appear at 150MHz as well. I've tried integer_n tuning. > > I have verified that the ref_lock and lo_lock are both true. > > > Any suggestions? > > > Mike > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
