Thanks Marcus. Sorry I am new to USRP, so the USRP X300 has to work with a separate daughterboard? I had a USRP B200mini before, which can collect a single channel data but overflow gave me a lot of trouble.
So in terms of daughterboard, is TwinRX daughterboard good enough to fulfill this requirement (to collect two channel data with different center frequency)? Thanks, Peng On Sun, Mar 3, 2019 at 7:20 AM Marcus D. Leech via USRP-users < usrp-users@lists.ettus.com> wrote: > On 03/03/2019 01:54 AM, Peng Xie via USRP-users wrote: > > Hi Guys, > > > > I have a question about USRP X300. My plan is to receive RF data from > > two channels, and each channel has difference center frequency, e.g., > > first one set to 1.5 GHz, second one set to 1.6 GHz. Initially I want > > to use USRP B210 dual channel transceiver (as it is much cheaper), > > however, later I realized that B210 shared the same LO for each > > channel, which means I cannot set different center frequency on each > > channel. > > > > So my question is does X300 works for this case? Can I set different > > center frequency for each channel? > > > > Thanks, > > > > Peng > > > > > Yes, you can. The details will depend on which daughterboards you use. > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
