On 02/26/2019 12:10 PM, Andy Walls wrote:
Hi Marcus:
If one configures a USRP Sink to use the "TX/RX" port for Tx and a USRP
Source to use "TX/RX" port for Rx, does one still get both switches'
worth of isolation during Tx, or is it only the single switch's worth
of isolation in that case?
(I'm too lazy to run that down in the source code at the moment. :] )
Thanks,
Andy
You still, as far as I can tell, get two switches worth, since the RX
channel is ALWAYS (as far as I recall) switched to the RX2 port during
TX, which gives you
two layers of switches regardless.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
