Hi, I am trying to connect a USRP X300 (1x UBX) to a PC using the PCI-Express Desktop Kit and I would like to ask for some help trying to make sense of the errors described below.
My PC runs a freshly installed Ubuntu 18.04 with UHD built from source. These are the steps that I have done so far: - Install NI RIO following these instructions https://files.ettus.com/manual/page_ni_rio_kernel.html - Enable NI RIO driver with `sudo /usr/local/bin/niusrprio_pcie start` - Load XG FPGA image `uhd_image_loader --args="type=x300,resource=RIO0,fpga=XG` - Power cycle USRP + PC - Enable NI RIO driver again with `sudo /usr/local/bin/niusrprio_pcie start` - Device is being recognized: ------------------------------------------------------------------------------------------------------------------------------------------------------ sdr@sdr-fujitsu-pc:~$ uhd_find_devices [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; UHD_3.14.0.0-85-g33233e5c [INFO] [NIRIO] rpc_client stopping... [INFO] [NIRIO] rpc_client stopped. [INFO] [NIRIO] rpc_client stopping... [INFO] [NIRIO] rpc_client stopped. -------------------------------------------------- -- UHD Device 0 -------------------------------------------------- Device Address: serial: 3140261 fpga: XG name: product: X300 resource: RIO0 type: x300 ------------------------------------------------------------------------------------------------------------------------------------------------------ Now, trying to benchmark the receive rate gives me the lengthy list of error messages below. ------------------------------------------------------------------------------------------------------------------------------------------------------ sdr@sdr-fujitsu-pc:~$ sudo /usr/local/lib/uhd/examples/benchmark_rate --rx_rate=100e6 --args resource=RIO0 [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; UHD_3.14.0.0-85-g33233e5c [INFO] [NIRIO] rpc_client stopping... [INFO] [NIRIO] rpc_client stopped. [INFO] [NIRIO] rpc_client stopping... [INFO] [NIRIO] rpc_client stopped. [00:00:00.000011] Creating the usrp device with: resource=RIO0... [INFO] [NIRIO] rpc_client stopping... [INFO] [NIRIO] rpc_client stopped. [INFO] [NIRIO] rpc_client stopping... [INFO] [NIRIO] rpc_client stopped. [INFO] [X300] X300 initialization sequence... [INFO] [X300] Connecting to niusrpriorpc at localhost:5444... [INFO] [NIRIO] rpc_client stopping... [INFO] [NIRIO] rpc_client stopped. [INFO] [X300] Using LVBITX bitfile /usr/local/share/uhd/images/usrp_x300_fpga_XG.lvbitx... [INFO] [NIRIO] rpc_client stopping... [INFO] [NIRIO] rpc_client stopped. [INFO] [X300] Radio 1x clock: 200 MHz [INFO] [GPS] No GPSDO found [INFO] [0/DmaFIFO_0] Initializing block control (NOC ID: 0xF1F0D00000000000) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1313 MB/s) [INFO] [0/DmaFIFO_0] BIST passed (Throughput: 1315 MB/s) [INFO] [0/Radio_0] Initializing block control (NOC ID: 0x12AD100000000001) [INFO] [0/Radio_1] Initializing block control (NOC ID: 0x12AD100000000001) [INFO] [0/DDC_0] Initializing block control (NOC ID: 0xDDC0000000000000) [INFO] [0/DDC_1] Initializing block control (NOC ID: 0xDDC0000000000000) [INFO] [0/DUC_0] Initializing block control (NOC ID: 0xD0C0000000000000) [INFO] [0/DUC_1] Initializing block control (NOC ID: 0xD0C0000000000000) [ERROR] [UHD] Exception caught in safe-call. in max287x<max287x_regs_t>::~max287x() [with max287x_regs_t = max2871_regs_t] at /home/sdr/nicola/uhd/host/lib/include/uhdlib/usrp/common/max287x.hpp:475 shutdown(); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1016 Received index: 1080 [ERROR] [UHD] Exception caught in safe-call. in max287x<max287x_regs_t>::~max287x() [with max287x_regs_t = max2871_regs_t] at /home/sdr/nicola/uhd/host/lib/include/uhdlib/usrp/common/max287x.hpp:475 shutdown(); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1017 Received index: 1081 [ERROR] [UHD] Exception caught in safe-call. in max287x<max287x_regs_t>::~max287x() [with max287x_regs_t = max2871_regs_t] at /home/sdr/nicola/uhd/host/lib/include/uhdlib/usrp/common/max287x.hpp:475 shutdown(); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1018 Received index: 1082 [ERROR] [UHD] Exception caught in safe-call. in max287x<max287x_regs_t>::~max287x() [with max287x_regs_t = max2871_regs_t] at /home/sdr/nicola/uhd/host/lib/include/uhdlib/usrp/common/max287x.hpp:475 shutdown(); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1019 Received index: 1083 [ERROR] [DBMGR] The daughterboard manager encountered a recoverable error in init. Loading the "unknown" daughterboard implementations to continue. The daughterboard cannot operate until this error is resolved. EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1015 Received index: 1079 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_00_Port_31) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_00_Port_30) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in virtual uhd::rfnoc::x300_radio_ctrl_impl::~x300_radio_ctrl_impl() at /home/sdr/nicola/uhd/host/lib/usrp/x300/x300_radio_ctrl_impl.cpp:207 _tree->remove(fs_path("rx_codecs" / _radio_slot)); _tree->remove(fs_path("tx_codecs" / _radio_slot)); _tree->remove(_root_path / "rx_fe_corrections"); _tree->remove(_root_path / "tx_fe_corrections"); if (_radio_type == PRIMARY) { for (const gpio_atr::gpio_attr_map_t::value_type attr : gpio_atr::gpio_attr_map) { _tree->remove(fs_path("gpio") / "FP0" / attr.second); } } if (_radio_type == PRIMARY) { _regs->misc_outs_reg.set(radio_regmap_t::misc_outs_reg_t::ADC_RESET, 1); _regs->misc_outs_reg.set(radio_regmap_t::misc_outs_reg_t::DAC_RESET_N, 0); } _regs->misc_outs_reg.write(radio_regmap_t::misc_outs_reg_t::DAC_ENABLED, 0); _regs->misc_outs_reg.flush(); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1021 Received index: 1085 [ERROR] [UHD] Exception caught in safe-call. in virtual x300_dac_ctrl_impl::~x300_dac_ctrl_impl() at /home/sdr/nicola/uhd/host/lib/usrp/x300/x300_dac_ctrl.cpp:60 _iface->write_spi(_slaveno, spi_config_t::EDGE_RISE, ((0x01) << 8) | (0xEF), 16); _iface->write_spi(_slaveno, spi_config_t::EDGE_RISE, ((0x02) << 8) | (0x1F), 16); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1022 Received index: 1086 [ERROR] [UHD] Exception caught in safe-call. in virtual x300_adc_ctrl_impl::~x300_adc_ctrl_impl() at /home/sdr/nicola/uhd/host/lib/usrp/x300/x300_adc_ctrl.cpp:123 this->send_ads62p48_reg(0x40); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1023 Received index: 1087 [ERROR] [UHD] Exception caught in safe-call. in virtual uhd::rfnoc::block_ctrl_base::~block_ctrl_base() at /home/sdr/nicola/uhd/host/lib/rfnoc/block_ctrl_base.cpp:153 if (get_ctrl_ports().size() > 0) { _start_drain(get_ctrl_ports().front()); } _tree->remove(_root_path); -> EnvironmentError: IOError: [0/Radio_0] sr_write() failed: EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1024 Received index: 1088 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_41) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1025 Received index: 1089 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_02_Port_51) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_02_Port_50) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_03_Port_61) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_03_Port_60) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_04_Port_71) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_04_Port_70) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_05_Port_80) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 [ERROR] [UHD] Exception caught in safe-call. in ctrl_iface_impl<_endianness>::~ctrl_iface_impl() [with uhd::endianness_t _endianness = (uhd::endianness_t)1] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:52 this->send_cmd_pkt(0, 0, true); -> EnvironmentError: IOError: Block ctrl (CE_06_Port_90) no response packet - AssertionError: bool(buff) in uint64_t ctrl_iface_impl<_endianness>::wait_for_ack(bool, double) [with uhd::endianness_t _endianness = (uhd::endianness_t)1; uint64_t = long unsigned int] at /home/sdr/nicola/uhd/host/lib/rfnoc/ctrl_iface.cpp:142 Error: EnvironmentError: IOError: Block ctrl (CE_01_Port_40) packet parse error - EnvironmentError: IOError: Expected packet index: 1020 Received index: 1084 ------------------------------------------------------------------------------------------------------------------------------------------------------ Any suggestions on what to try next are highly appreciated. The device works fine in 1GE mode. I do not have the means to test 10GE mode. Best regards Nicola
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
