* sorry typo Each of my N310's SFP+0 ports is configured as follows:
MTU: 8000 Address: 192.168.20.5x/24 On Mon, Jan 21, 2019 at 2:37 PM Ali Dormiani <sdorm...@eng.ucsd.edu> wrote: > Hello everyone, > > I am having a strange (new) problem where my host machine can not detect > more than one USRP at a time. I recently re-installed everything to update > all devices to 3.13.1.0. > > Each of my N310's SFP+0 ports is configured as follows: > > MTU: 8000 > > Address: 192.168.5x/24 > > Where x is the device number I have assigned (1-9). > > What is bizarre is if two N310's are connected to the host, only one shows > up in uhd_find_devices. > > Each N310 connects fine on its own. Just plug and play. But attaching more > than one to the server breaks things. > > The server is manually configured with a different static ip for each SFP+ > port: > > 192.168.20.2y > > Where y is the port number (0-6). > > Everything (SD file system, host install, FPGA, ixgbe driver) is up to > date. I can do whatever I want if only one device is attached (SSH, UHD > commands, GNU radio, device_probe). > > > I'm not sure what to do about this as individually all of them work > perfectly. Any ideas? > > Thank you for your time, > > Ali > > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
