That is correct, and that will also allow you to run said example. -- Martin
On Thu, Jan 10, 2019 at 10:27 AM Xingjian Chen via USRP-users < usrp-users@lists.ettus.com> wrote: > It works by setting tx-blockid to 0/Radio_0 and tx-chan to 1. I think > there is only one radio in E312 but two channels for tx and two channels > for rx. Here is a reference below. > > > http://ettus.80997.x6.nabble.com/USRP-users-RFNoC-Radio-Select-B-E312-E310-and-GPSDO-td8395.html > > James > > ------------------------------ > *From:* USRP-users <usrp-users-boun...@lists.ettus.com> on behalf of > Xingjian Chen via USRP-users <usrp-users@lists.ettus.com> > *Sent:* Wednesday, January 9, 2019 10:37:20 PM > *To:* USRP-users@lists.ettus.com > *Subject:* [USRP-users] Fw: E312 rfnoc_radio_loopback.cpp FPGA image > > > Dear all, > > I am working on the *rfnoc_radio_loopback.**cpp* example in the latest > UHD repository on my *E312*. This loopback example seems requires two > radio blocks. May I know * how to build the FPGA image to have two radios > blocks on the device* such as Radio_0 and Radio_1? Currently, I can build > an image with only one radio by the following common: > > ./uhd_image_builder.py window fft -d e310 -t E310_RFNOC_sg3 -m 5 > --fill-with-fifos > > Is there any existed image I should download for this rfnoc_radio_loopback > example for E312? Thank you. > > > James > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
