Hey folks, The Knowledge Base webpage for the SBXs daughterboards [1] mentions that their maximum output power is 100 mW (20 dBm), and that the transmit gains range goes from 0 to 31.5 dB.
Does this mean 20 dBm is the power output when the gain is set to 31.5 dB? Also, the X300 Starting Guide [2] mentions that you shouldn't apply more than -15 dBm to any RF input. If I use 30 dB of attenuation in a loopback configuration (actually, TX/RX from one X310 to RX2 of another), and considering the answer to my last question is positive, would ~25 dB of TX gain be the overall maximum value you can use? Thanks in advance! Leo [1] https://kb.ettus.com/SBX [2] https://kb.ettus.com/X300/X310_Getting_Started_Guides
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
