On 10/15/2018 10:41 AM, Mercado, Alejandra via USRP-users wrote:
Sure thing:
* UHD version UHD_003.010.003
* GnuRadio version 3.7.9rc1
* Running on Ubuntu 16.04
Thanks for your help
You should look for messages from UHD about failing to set the requested
sample rate.
It would also be instructive to look at an FFT at the "troublesome"
sample rates and compare against the closest "good" sample rate.
Given your configuration--0dB gain, and a shorted antenna input, you'll
be looking entirely at internal noise, which can have a spur population
that will vary with sample rate.
On Mon, Oct 15, 2018 at 10:08 AM Michael Dickens
<michael.dick...@ettus.com <mailto:michael.dick...@ettus.com>> wrote:
OK thanks, Ale; maybe you did say; now we really do know ;)
Related: What version of UHD are you using?
The UHD version does make a difference, as some issues with the
B2XY series have been fixed recently that were introduced after
the 3.9 LTS release. - MLD
On Mon, Oct 15, 2018, at 8:43 AM, Mercado, Alejandra wrote:
Dear USRP and GnuRadio folks,
My apologies... I thought I had specified that I am using B210.
Regards
On Fri, Oct 12, 2018 at 9:52 PM Michael Dickens
<michael.dick...@ettus.com <mailto:michael.dick...@ettus.com>> wrote:
Hi Ale - Reducing this query to just the USRP list since I'm
guessing if there is any issue its with that side of things.
I'll reiterate Marcus' query, and augment it. The performance
depends on which USRP and which version of UHD you're using.
You didn't mention those. Scripts are important (thanks!),
but more info is required. Cheers! - MLD
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
