On 09/27/2018 06:34 PM, Jason Meyer wrote:
Hi Marcus,
I am using UHD v3.11.1.0. The command format I've used is:
uhd_image_loader --args="type=x300,addr=192.168.10.2"
--fpga-path="/usr/local/share/uhd/images/<fpga_image>.bit"
Does the command produce any output?
How are you confirming that it's reverting to a previous image?
Except for broken hardware, this should "just work". But you've
mentioned the same behavior on multiple X310s.
Jason
On Thu, Sep 27, 2018 at 5:28 PM Marcus D. Leech via USRP-users
<usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote:
On 09/27/2018 03:46 PM, Jason Meyer via USRP-users wrote:
> Hello,
>
> I have been working with multiple X310 USRPs and attempting to load
> custom FPGA firmware onto the motherboard EEPROM using the
> uhd_image_loader command. The command appears to be successful, but
> the FPGA fails to load the image on reboot. The image functions
just
> fine when I program it through JTAG and Vivado Hardware Manager,
but I
> would like to store it in EEPROM to avoid needing to re-program
every
> time I reboot the radios. The same error has occurred on multiple
> motherboards, and continues to occur when I use uhd_image_loader to
> load an image retrieved from uhd_images_downloader.
>
> What options do I have for debugging the EEPROM?
>
> Thank you,
> Jason Meyer
>
>
This should "Just Work(tm)"
How exactly are you using uhd_image_loader, and what version of
UHD are
you using?
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
