The N310 has a shared LO for each daughterboard such that you can't set the frequency independently for the two channels of a single daughterboard (on either Tx or Rx). If you do not require the full bandwidth you could digitally move the signals in frequency independently within the bandwidth.
Rob On Tue, Sep 11, 2018 at 4:25 PM Avila, Jose A via USRP-users < usrp-users@lists.ettus.com> wrote: > Hello, > > > We are trying to transmit out of the N310 with 4 channels simultaneously, > with the attached flowgraph we got it to transmit by using 2 rfnoc:radio > blocks with 2 channels each but we can't seem to find where to change the > center frequency of the 2nd channel of the rfnoc: radio block. > > > Thank you, > > Jose > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
