Thanks for you quick answer Marcus: I always thought it was impossible to create 2 multi_usrp objects which connects to the same X300 device. Is this really possible? I can try that on my side later if you think its possible.
Best regards, Serge - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - *Meet us at ION GNSS+ 2018 in Miami! Sept 24-28 2018, booth 604.* *Serge Malo * CDO & Co-founder, Skydel Solutions Cell: 1-514-294-4017 www.skydelsolutions.com Twitter: @skydelsol <https://twitter.com/skydelsol> Avis : Ce message est confidentiel et protégé par le secret professionnel. Si vous n'êtes pas le destinataire, veuillez informer l'expéditeur par courriel immédiatement et effacer ce message et en détruire toute copie. / Notice: This message is confidential and privileged. If you are not the addressee, please inform the sender by return e-mail immediately and delete this message and destroy all copies. On 7 September 2018 at 16:35, Marcus D. Leech via USRP-users < usrp-users@lists.ettus.com> wrote: > On 09/07/2018 04:32 PM, Serge Malo via USRP-users wrote: > > Hi all, > > I'm trying to use 2 different sampling rates the 2 TX channels of a X300. > Basically, I create 2 different tx_streamers, and call usrp->set_tx_rate() > for each channel. > > I'm getting this error from UHD: > Multiple sampling rates downstream of TX Terminator 0: RuntimeError: Node > 0/DUC_0 specifies 1.25e+07, node 0/DUC_1 specifies 2.5e+07. > > > I'm using UHD 3.10.3.0. > Can you tell me if this is expected, or should I be able to use 2 > different sampling rates? > > Thanks, > Serge > > If you want different sample rates, you'll likely need to create two > independent multi_usrp objects to contain the streamers. > > > > > > - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - > - - - - - - - - - - - - - > *Meet us at ION GNSS+ 2018 in Miami! Sept 24-28 2018, booth 604.* > *Serge Malo * > CDO & Co-founder, Skydel Solutions > Cell: 1-514-294-4017 > www.skydelsolutions.com > Twitter: @skydelsol <https://twitter.com/skydelsol> > Avis : Ce message est confidentiel et protégé par le secret professionnel. > Si vous n'êtes pas le destinataire, veuillez informer l'expéditeur par > courriel immédiatement et effacer ce message et en détruire toute copie. / > Notice: This message is confidential and privileged. If you are not the > addressee, please inform the sender by return e-mail immediately and delete > this message and destroy all copies. > > > _______________________________________________ > USRP-users mailing > listUSRP-users@lists.ettus.comhttp://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
