Hi Marcus, with UHD 3.10 we could run GR flowgraphs for hours. It recognizes the daughterboardand everything. I hope R&D can help.
Cheers Johannes ________________________________________ Von: USRP-users <usrp-users-boun...@lists.ettus.com> im Auftrag von Marcus D. Leech via USRP-users <usrp-users@lists.ettus.com> Gesendet: Freitag, 10. August 2018 18:28 An: usrp-users@lists.ettus.com Betreff: Re: [USRP-users] USRP2r4 \w RFX2400 fails with UHD3.14 On 08/10/2018 04:24 AM, Johannes Demel via USRP-users wrote: > Hi Marcus, > > I put my answer on top. I hope that doesn't lead to confusion. > > Regarding (A): I hope it should work. How would I proceed to debug it? Does the same "unknown daughter-board" error show up with an earlier UHD (like the UHD 3.10 you mention below)?? > > Regarding (B): We have a laptop with a 1G NIC, a 1G switch and a USRP2 > on the other end. > This setup works with UHD3.10 (see my initial email on the topic). We > could run GR flowgraphs etc. Those USRPs are pretty old but since they > still work, we'd like to use them. Also, they do a pretty good job for > what they are intended for. > How would we proceed here? > We may be dealing with a regression in the code-base here. Hopefully someone from R&D will chime in here. The USRP2 code hasn't changed in a very long time, but there have been improvements made to generic parts of the UHD codebase that could affect the USRP2. _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
