Found the problem. Was using the wrong adapter.
On Sun, Jul 29, 2018 at 9:07 PM, Sayyed Dormiani Tabatabaei < sdorm...@eng.ucsd.edu> wrote: > I just followed the online KB guide exactly (I think). I have a successful > serial connection and RJ45 connection. > > Here is the output from updating the HG (default) image (over RJ45 > connection to host laptop). > > root@noiselab-10gig-1:/usr/local/share/uhd/images# uhd_image_loader > --args type=n3xx, addr=ni-n3xx-315A35C > [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; > UHD_3.13.0.HEAD-0-gf114cfa0 > [INFO] [MPMD] Initializing 1 device(s) in parallel with args: > mgmt_addr=192.168.10.4,type=n3xx,product=n310,serial=315A35C > ,claimed=False,reachable=No,skip_init=1 > [INFO] [MPM.main] Launching USRP/MPM, version: 3.13.0.0-gunknown > [INFO] [MPM.main] Spawning RPC process... > [INFO] [MPM.PeriphManager] Device serial number: 315A35C > [INFO] [MPM.PeriphManager] Initialized 2 daughterboard(s). > [INFO] [MPM.PeriphManager.UDP] No CHDR interfaces found! > [INFO] [MPM.PeriphManager] init() called with device args `'. > [INFO] [MPM.PeriphManager.UDP] No CHDR interfaces found! > [INFO] [MPM.PeriphManager.UDP] No CHDR interfaces found! > [INFO] [MPM.RPCServer] RPC server ready! > [INFO] [MPM.RPCServer] Spawning watchdog task... > [INFO] [MPM.PeriphManager.UDP] No CHDR interfaces found! > [INFO] [MPM.PeriphManager.UDP] No CHDR interfaces found! > [INFO] [MPMD] Claimed device without full initialization. > [INFO] [MPMD IMAGE LOADER] Starting update. This may take a while. > [INFO] [MPM.PeriphManager] Updating component `fpga' > [INFO] [MPM.PeriphManager] Updating component `dts' > [INFO] [MPM.RPCServer] Resetting peripheral manager. > [INFO] [MPM.PeriphManager] Device serial number: 315A35C > [INFO] [MPM.PeriphManager] Initialized 2 daughterboard(s). > [INFO] [MPM.PeriphManager.UDP] No CHDR interfaces found! > [INFO] [MPM.PeriphManager] init() called with device args `'. > [INFO] [MPMD IMAGE LOADER] Update component function succeeded. > [INFO] [MPM.PeriphManager.UDP] No CHDR interfaces found! > > Here is the ifconfig given from the N310 (obtained via serial screen > terminal) > > root@ni-n3xx-315A35C:~# ifconfig > eth0 Link encap:Ethernet HWaddr 00:80:2F:19:64:4E > inet addr:192.168.10.4 Bcast:192.168.10.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:12190 errors:0 dropped:2 overruns:0 frame:0 > TX packets:1684 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:18070162 (17.2 MiB) TX bytes:119916 (117.1 KiB) > Interrupt:145 Base address:0xb000 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > UP LOOPBACK RUNNING MTU:65536 Metric:1 > RX packets:90 errors:0 dropped:0 overruns:0 frame:0 > TX packets:90 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:7280 (7.1 KiB) TX bytes:7280 (7.1 KiB) > > sfp0 Link encap:Ethernet HWaddr 00:80:2F:19:64:4F > UP BROADCAST MULTICAST MTU:8000 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > sfp1 Link encap:Ethernet HWaddr 00:80:2F:19:64:50 > UP BROADCAST MULTICAST MTU:8000 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > > The RJ45 connection is still working after FPGA update. Neither SFP+ port > lights up when I plug in the provided adapter. Rebooting after updating the > FPGA does not help either. > > Thank you for your time, > > Ali > > > On Sun, Jul 29, 2018 at 8:47 PM, Neel Pandeya <neel.pand...@ettus.com> > wrote: > >> Please follow the N310 Getting Started Guide on the Ettus Research >> Knowledge Base. Do not follow the printed Getting Started Guide that was >> included in the N310 box. The on-line guide should work for you. Please let >> us know if you're able to make any progress. >> >> --Neel Pandeya (sent from my Android phone) >> >> On Mon, Jul 30, 2018, 09:11 Sayyed Dormiani Tabatabaei via USRP-users < >> usrp-users@lists.ettus.com> wrote: >> >>> Hello, >>> >>> I have an N310 running UHD 13.0.0 internally with an updated fpga image. >>> My host machine has UHD 13.0.0 and GNUradio 3.7.12.0 compiled and installed >>> from source. >>> >>> I can not get either SFP+ port to work. The light will not turn on when >>> the adapter and Ethernet cable are plugged in. This occurs for both the >>> latest HG and XG FPGA images. >>> >>> Should I try the WX image? Any help on getting these SFP+ ports working >>> is greatly appreciated. >>> >>> Thank you for your time, >>> >>> Ali Dormiani >>> _______________________________________________ >>> USRP-users mailing list >>> USRP-users@lists.ettus.com >>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >>> >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
