Thank,
Martin.
I try and can not work!
I need to deep into now.

Best,Regards
Carry
________________________________
From: USRP-users <usrp-users-boun...@lists.ettus.com> on behalf of Martin Braun 
via USRP-users <usrp-users@lists.ettus.com>
Sent: Wednesday, July 25, 2018 5:34:44 AM
To: 'USRP-users@lists.ettus.com'
Subject: Re: [USRP-users] usrp e310 one tx one rx

Link should be:

https://github.com/EttusResearch/fpga/blob/f27926410328883a315d5230146936d2d782bd09/usrp3/top/e300/e310_core.v#L319

On 07/24/2018 02:20 PM, Martin Braun wrote:
> I think you might be fine changing this line:
>
> https://github.com/EttusResearch/fpgadev/blob/f27926410328883a315d5230146936d2d782bd09/usrp3/top/e300/e310_core.v#L319
>
> ...but it's untested and unsupported.
>
> Cheers,
> Martin
>
> On 07/22/2018 04:02 AM, carry chen via USRP-users wrote:
>> Hi,
>>
>> list,
>>
>> I want the usrp e310 run only one tx path and one rx path (to save some
>> fpag resource)
>>
>> how can I modify the host code and fpga code ?
>>
>> I use the uhd version:  ca09fd2bea0128c18eac4b0ff8a9b30fccdf7698
>>
>>                fpga version:  63e630a13fde1735b98eab1f401f60f0b354cafb
>>
>>
>> Thanks.
>>
>>
>> Best, Regards,
>>
>> Carry
>>
>>
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users@lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>


_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to