Hello Johannes, Yes, in that case you can take the 10 MHz Ref Out from the primary X310 and connect it to the 10 MHz Ref in of the second X310. What cannot be done is extend that to a third X310 by daisy chaining or use the 1 PPS to achieve the exact timing sync needed for precise phase alignment of multiple X310s.
Regards, Derek On Mon, Jul 23, 2018 at 10:17 AM, Johannes Demel via USRP-users < usrp-users@lists.ettus.com> wrote: > Hi all, > > we have 2 USRP X310 which we need to synchronize. Hopefully to make things > easier, we only need frequency synchronization. Is it possible to connect > 'Ref Out' to 'Ref In' on another X310 for that purpose? > Previously, we used a signal generator to supply two USRPs with a > reference 10MHz signal. If we could get rid of the signal generator, that > would be really helpful. > > Cheers > Johannes > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
