Hi David, That version of UHD (UHD_003.010.HEAD-197-g053111dc) does not support that version of the UBX board. You need UHD version 3.10.0.1 or later. It looks like your master and maint branches are quite a bit out of date. Try pulling the latest master:
> git checkout master > git pull Then build and try again. It should work just fine. Regards, Michael On Tue, Jul 10, 2018 at 3:09 PM, Myers, David via USRP-users < usrp-users@lists.ettus.com> wrote: > Hello all, > > > > I recently purchased 4 N210s and installed 4 new UXB-40 daughter cards. > > When I run uhd_usrp_probe on each of the 4 N210s it fails to identify and > returns an unknown ID and name. > > > > I’ve run the probe from two different machines (Ubuntu 16.04 and Xubuntu > 16.04). > > I’ve run the probe with UHD 3.9, 3.10, and 3.11 (uhd installed from > Ubuntu package manager, “maint” source code, and “master” source code > respectively) > > I’ve run the uhd_images_downloader and rerun the uhd_image_loader on each > board. > > I’ve taking two other N210s, successfully identified their respective SXB > and WBX cards with uhd_usrp_probe, replaced those cards with UBX-40s, and > then failed to ID the newly installed cards. > > I’ve replicated the issue on Mboard: N210r4 and Mboard: N210. > > > > Below is the one outputs from uhd_usrp_probe: > > > > linux; GNU C++ version 5.4.0 20160609; Boost_105800; > UHD_003.010.HEAD-197-g053111dc > > > > -- Opening a USRP2/N-Series device... > > -- Current recv frame size: 1472 bytes > > -- Current send frame size: 1472 bytes > > _____________________________________________________ > > / > > | Device: USRP2 / N-Series Device > > | _____________________________________________________ > > | / > > | | Mboard: N210r4 > > | | hardware: 2577 > > | | mac-addr: 00:80:2f:18:6e:3e > > | | ip-addr: 192.168.10.2 > > | | subnet: 255.255.255.255 > > | | gateway: 255.255.255.255 > > | | gpsdo: none > > | | serial: 313E047 > > | | FW Version: 12.4 > > | | FPGA Version: 11.1 > > | | > > | | Time sources: none, external, _external_, mimo, gpsdo > > | | Clock sources: internal, external, mimo, gpsdo > > | | Sensors: gps_gpgga, gps_gprmc, gps_time, gps_locked, gps_servo, > mimo_locked, ref_locked > > | | _____________________________________________________ > > | | / > > | | | RX DSP: 0 > > | | | > > | | | Freq range: -50.000 to 50.000 MHz > > | | _____________________________________________________ > > | | / > > | | | RX DSP: 1 > > | | | > > | | | Freq range: -50.000 to 50.000 MHz > > | | _____________________________________________________ > > | | / > > | | | RX Dboard: A > > | | | ID: Unknown (0x007c) > > | | | Serial: 313C17A > > | | | _____________________________________________________ > > | | | / > > | | | | RX Frontend: 0 > > | | | | Name: Unknown (0x007c) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | RX Codec: A > > | | | | Name: ads62p44 > > | | | | Gain range digital: 0.0 to 6.0 step 0.5 dB > > | | | | Gain range fine: 0.0 to 0.5 step 0.1 dB > > | | _____________________________________________________ > > | | / > > | | | TX DSP: 0 > > | | | > > | | | Freq range: -50.000 to 50.000 MHz > > | | _____________________________________________________ > > | | / > > | | | TX Dboard: A > > | | | ID: Unknown (0x007b) > > | | | Serial: 313C17A > > | | | _____________________________________________________ > > | | | / > > | | | | TX Frontend: 0 > > | | | | Name: Unknown (0x007b) - 0 > > | | | | Antennas: > > | | | | Sensors: > > | | | | Freq range: 0.000 to 0.000 MHz > > | | | | Gain Elements: None > > | | | | Bandwidth range: 0.0 to 0.0 step 0.0 Hz > > | | | | Connection Type: IQ > > | | | | Uses LO offset: No > > | | | _____________________________________________________ > > | | | / > > | | | | TX Codec: A > > | | | | Name: ad9777 > > | | | | Gain Elements: None > > > > With thanks, > > > > David Myers > > Georgia Tech Research Institute > > david.my...@gtri.gatech.edu > > > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
