I must admit it's been a while, but I remember building a system with
an RX/TX roundtrip time through the host of about 5ms using gigabit
ethernet and relatively small packets. 

What's your interface, what's the packet size you're using, and at
which sampling rate?

Also, how often do these burst happen? Maybe we're seeing a problem
getting control flow done fast enough.

Best regards,
Marcus

On Mon, 2018-07-02 at 21:55 +0200, Felipe Augusto Pereira de Figueiredo
wrote:
> Hi Marcus,
> 
> It is a x310 and we tried with different number of milliseconds in
> advance, we started with 2 ms in advance and went to 7 ms.
> 
> Thanks and Kind Regards,
> 
> Felipe
> 
> On Mon, Jul 2, 2018 at 9:48 PM, Marcus Müller <marcus.mueller@ettus.c
> om> wrote:
> > Hi Felipe,
> > 
> > which USRP are we talking about?
> > and: how much in advance to the time of transmission do you send
> > your
> > packet to the USRP?
> > 
> > Best regards,
> > Marcus
> > 
> > On Mon, 2018-07-02 at 16:37 +0200, Felipe Augusto Pereira de
> > Figueiredo
> > via USRP-users wrote:
> > > Dear All,
> > > 
> > > I've got the following problem:
> > > 
> > > I transmit one 1 ms long packet at a specific time, lets say t0.
> > I
> > > also use SOB and EOB to delimit the packets.
> > > 
> > > What I want to do is to transmit the next 1 ms long packet at
> > t0+1ms,
> > > however, I'm seeing "L" being printed in the log, meaning the
> > packet
> > > is late.
> > > 
> > > To summarize, I have a scheduler that works for slots of 1 ms and
> > I
> > > would like to have the packets being transmitted in sequence when
> > I
> > > have then with timestamps 1 ms apart from each other.
> > > 
> > > Is it possible?
> > > 
> > > Thanks and Kind regards,
> > > 
> > > Felipe Augusto
> > > 
> > > 
> > > _______________________________________________
> > > USRP-users mailing list
> > > USRP-users@lists.ettus.com
> > > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.co
> > m
> 
> 

_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
  • [USRP-users] Transmitt... Felipe Augusto Pereira de Figueiredo via USRP-users
    • Re: [USRP-users] ... Marcus Müller via USRP-users
      • Re: [USRP-use... Felipe Augusto Pereira de Figueiredo via USRP-users
        • Re: [USRP... Marcus Müller via USRP-users
          • Re: [... Felipe Augusto Pereira de Figueiredo via USRP-users
            • ... Felipe Augusto Pereira de Figueiredo via USRP-users
              • ... Sylvain Munaut via USRP-users

Reply via email to