Hello,
Currently i am working with NI USRP 2922 and I installed UHD drivers and
gnu radio
but while i use uhd_devices_probe it shows below return error
{sudo uhd_usrp_probe --args "addr=192.168.10.2"
[INFO] [UHD] linux; GNU C++ version 5.4.0 20160609; Boost_105800;
UHD_3.12.0.0-0-unknown
[INFO] [USRP2] Opening a USRP2/N-Series device...
[INFO] [USRP2] Current recv frame size: 1472 bytes
[INFO] [USRP2] Current send frame size: 1472 bytes
Error: RuntimeError:
Please update the firmware and FPGA images for your device.
See the application notes for USRP2/N-Series for instructions.
Expected FPGA compatibility number 11, but got 10:
The FPGA build is not compatible with the host code build.
Please run:
"/usr/local/lib/uhd/utils/uhd_images_downloader.py"
"/usr/local/bin/uhd_image_loader" \
--args="type=usrp2,addr=192.168.10.2"
}
Even after going through the instruction which it said in last 3 lines this
error still continues .
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
