Re: [USRP-users] N210 + WBX and X310 + TwinRXs sample alignment

Marcus D. Leech via USRP-users Wed, 30 May 2018 11:06:57 -0700

On 05/30/2018 02:00 PM, Steve Gough wrote:

Thanks for the reply, Ian and Marcus.
I see. Could you please tell me what should be the values I must seton the host and N210 for the gateway and subnet ?
Thanks!

Gateway addy should all be (assuming 192.168.10.x) subnet:

192.168.10.1

Subnet mask should be:

255.255.255.0

On Wed, May 30, 2018 at 12:36 PM, Ian Buckley via USRP-users<usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote:


    Those N210 settings are broken also…bad subnet and gateway

    > On May 30, 2018, at 9:26 AM, Marcus D. Leech via USRP-users
    <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>>
    wrote:
    >
    > On 05/30/2018 12:22 PM, Steve Gough via USRP-users wrote:
    >> Hi Neel and USRP mailing list,
    >>
    >> The uhd_usrp_probe returns as follows:
    >>
    >> For the N210 with WBX:
    >> Mboard: N210r4
    >> |   |   hardware: 2577
    >> |   |   product: 30194
    >> |   |   mac-addr: a0:36:fa:25:3a:6b
    >> |   |   ip-addr: 192.168.10.4
    >> |   |   subnet: 255.255.255.255
    >> |   |   gateway: 255.255.255.255
    >>
    >> For the X310 with 2 TwinRXs:
    >> Mboard: X310
    >> |   |   revision: 8
    >> |   |   revision_compat: 7
    >> |   |   product: 30818
    >> |   |   mac-addr0: 00:80:2f:25:c1:ec
    >> |   |   mac-addr1: 00:80:2f:25:c1:ed
    >> |   |   gateway: 192.168.10.1
    >> |   |   ip-addr0: 192.168.10.2
    >> |   |   subnet0: 255.255.255.0
    >> |   |   ip-addr1: 192.168.20.2
    >> |   |   subnet1: 255.255.255.0
    >> |   |   ip-addr2: 192.168.30.2
    >> |   |   subnet2: 255.255.255.0
    >> |   |   ip-addr3: 192.168.40.2
    >> |   |   subnet3: 255.255.255.0
    >>
    >> So, yes, it looks like the N210 and the X310 devices have
    different MAC addresses.
    >>
    
--------------------------------------------------------------------------------------------------
    >>
    >>
    >> The IPv4 settings on the host are :
    >> Address : 192.168.10.1
    >> Netmask : 24
    >> Gateway : 192.168.10.255
    >>
    >>
    > The  gateway address you have set on your host is the
    subnet-broadcast  address.  Not sure if this makes a difference in
    this case, since you're never going
    >  "off net" and will not require the gateway.  But maybe it's
    confusing your IP stack a bit?
    >
    >
    >
    > _______________________________________________
    > USRP-users mailing list
    > USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
    >
    http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
    <http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>


    _______________________________________________
    USRP-users mailing list
    USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
    http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
    <http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>

_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Re: [USRP-users] N210 + WBX and X310 + TwinRXs sample alignment

Reply via email to