Hi Marcus, 1.yes,we read it.But we could not find about a external devices.It is possible that one of tx port of N310 as external LO when achieve 4 channels sync receive?
2.From here: http://files.ettus.com/manual/page_usrp_n3xx.html#n3xx_ getting_started_connectivity we know that the SFP+ (sfp0, sfp1) ports are configured with static addresses 192.168.10.2/24 and 192.168.20.2/24 respectively. So i think we can connect to n310 with a SFP+ to RJ45 Adapter in sfp0. but in fact,we even could not ping 192.168.10.2. best regards Jon 2018-05-10 10:56 GMT+08:00 Marcus D. Leech via USRP-users < [email protected]>: > On 05/09/2018 10:44 PM, liu Jong via USRP-users wrote: > > Hi all, > We know that external LO is needed when we want to sync 4 channel of > N310.So Ettus supply the external LO or some advice? > Another quetion,if we want to directly connect via the SFPs and operate > N310 as X3xx from a host,how set that? > > best regards > Jon > > > Have you read through: > > https://kb.ettus.com/N300/N310 > > And: > > https://files.ettus.com/manual/page_usrp_n3xx.html > > Specifically: > > https://files.ettus.com/manual/page_usrp_n3xx.html#n3xx_mg_external_lo > > > > > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list [email protected] http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
