Hi all, I have tried the tx_waveforms example and measured it using a spectrum analyser (SA). However, no matter what input wave-type I chose, I will get the same output seen in the SA. For example, when I chose SINE and a center frequency of 100MHz, I observed spectrums at 100, 300, 500 ,700 ,900, ... Same waveform is observed for all the different wave-type (RAMP, CONST, SQUARE).
Why is this so? It's like only the center frequency is being sent. Thanks in advance!
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
