Hello,

I'm seeing some strange behavior on some new b205 we've received. These
units are Rev Cs so they should have the new caps at the receive switch
in order to remove the transient behavior I had highlighted in a
previous exchange. Two different units exhibit this exact behavior. The
plot below shows received power in dB (in this case 10 dB = full scale,
not 0)

The top plot is RX2 and the bottom one is Tx/Rx. I would expect both of
these to be very similar, however, there is a significant difference.
This occurs over all gain settings.

We had done some reworks in house of the older boards with the correct
caps an did not see this behavior. Is it possible that something is not
working as expected in the rev Cs? Any idea what could be causing this
behavior?


Best regards,
Dominik

-- 



-- 

i.A. Dominik Eyerly
Head of RF Software

Tel:      +49 (0) 351 7958019 233
Fax:     +49 (0) 351 7958019 232
Email:   d.eye...@konrad-technologies.de 
<mailto:d.eye...@konrad-technologies.de>

*Konrad GmbH — Fritz-Reichle-Ring 12 — D-78315 Radolfzell*
www.konrad-technologies.de <http://www.konrad-technologies.de>
www.abexstandard.org <http://www.abexstandard.org>

*Support Telefon: +49 (0) 7732 9815 100*
supp...@konrad-technologies.de <mailto:supp...@konrad-technologies.de>
sig
Geschäftsleitung: Michael Konrad 
Handelsregisternr: HRB 550593 in Freiburg 
Ust-Id-Nr. DE 206693267

VERTRAULICHKEITS-INFORMATION: Dieses e-Mail und alle anhängenden Dokumente, 
enthalten Informationen der Konrad GmbH und sind nur für die adressierte Person 
bestimmt. Diese können vertraulich und/oder von Veröffentlichungen ausgenommen 
sein. Das Kopieren und die Weitergabe an nicht autorisierte Dritte sind 
verboten. Für Zuwiderhandlungen können Sie haftbar gemacht werden. Falls Sie 
nicht der Empfänger sind, benachrichtigen Sie den Absender bitte umgehend. Danke

CONFIDENTIALITY NOTICE: This e-mail and any documents which may accompany it, 
contains information from Konrad GmbH, which is intended only for the use of 
the individual or entity to which it is addressed, and which may contain 
information that is privileged, confidential, and/or otherwise exempt from 
disclosure under applicable law. If the reader of this message is not the 
intended recipient, any disclosure, dissemination, distribution, copying or 
other use of this communication or its substance is prohibited. If you have 
received this communication in error, please contact us immediately. Thank you.

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to