Hi All, As I understand it, the B210 has maximum master clock rate of 61.44[MHz] for one channel, and 30.72 [MHz] per-channel while using two channels.
I am receiving through two channels, and would like to use a sample rate of 20[MHz] with central freq. of 98 [MHz]. I set the master frequency to max by editing the following line in the python file: * self.uhd_usrp_source_0.set_clock_rate(30.72e6, uhd.ALL_MBOARDS)* (Which is equivalent to writing "30.72e6" under "clock rate" in the USRP-SOURCE block in the grc). To my utmost disappointment, I receive the following error: *[WARNING] [MULTI_USRP] The hardware does not support the requested RX sample rate:* *Target sample rate: 20.000000 MSps* *Actual sample rate: 15.360000 MSps* Why is the master clock rate only half of what I assigned it? (I did try to insert anything above 30.72e6 and received an error that it exceeds the limit) Thanks for your time, Steve.
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
