On Wed, Apr 11, 2018 at 10:15 PM Yeo Jin Kuang Alvin (IA) < yjink...@dso.org.sg> wrote:
> Hi, > > > > Sorry I am very new to all these, do you mean that I have to download > visual studio to compile all the UHD .cpp and run them for the UHD > commands? > No, I mean that you can probably just get away with using UHD as-is with a program you write (either in Python or C++) invoking a UHD device and configuring it. There are many examples included in uhd/host/examples. If you are lucky you might even get away with using one of the example programs without modification, but I doubt it. > And for the FPGA image you talking about, is it the .bit file that is > generated in the IMPACT? > Yes. You have a long learning curve ahead of you. It's a good idea at this point to simply install UHD and get started using the B210 with some of the UHD examples to see how it works in practice. Nick > > > Thank you in advance! > > > > *From:* Nick Foster [mailto:bistrom...@gmail.com] > *Sent:* Thursday, 12 April 2018 12:04 PM > > > *To:* Yeo Jin Kuang Alvin (IA) > *Cc:* usrp-users@lists.ettus.com > *Subject:* Re: [USRP-users] AD9361 in USRP B210 > > > > The best option is probably to use existing UHD commands to set the gain, > frequency, master clock rate, etc., while modifying the image to generate > the transmit signal in the FPGA rather than in the host. > > Nick > > > > On Wed, Apr 11, 2018 at 6:41 PM Yeo Jin Kuang Alvin (IA) < > yjink...@dso.org.sg> wrote: > > Hi, > > > > I have the FPGA source code using Xilinx ISE 14.7, I want to output a > signal out that is generated from the FPGA, however I suppose I have to > control the AD9361 to get an output out to transmit unless I am wrong. > > > > Thanks in advance! > > > > *From:* Nick Foster [mailto:bistrom...@gmail.com] > *Sent:* Thursday, 12 April 2018 9:39 AM > *To:* Yeo Jin Kuang Alvin (IA) > *Cc:* usrp-users@lists.ettus.com > *Subject:* Re: [USRP-users] AD9361 in USRP B210 > > > > What exactly do you want to do? > > > > On Wed, Apr 11, 2018 at 6:33 PM Yeo Jin Kuang Alvin (IA) via USRP-users < > usrp-users@lists.ettus.com> wrote: > > Hi all, > > > > How do we set up the Ad9361_driver and ad9361 controls in the > uhd/host/lib/usrp/common file for Ubuntu? What are the steps and > prerequisites for this? > > > > Thank you in advance! > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
