I have been fighting for a day with issues on my N200s and N210s to no
avail. These were working units, but are giving me the following:
$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 4.8.5 20150623 (Red Hat 4.8.5-16);
Boost_105300; UHD_3.11.0.0-34-g4844f66d
[ERROR] [UHD] Exception caught in safe-call.
in virtual usrp2_iface_impl::~usrp2_iface_impl()
at /home/jmat/GR/src/uhd/host/lib/usrp/usrp2/usrp2_iface.cpp:81
this->lock_device(false); -> RuntimeError:
Please update the firmware and FPGA images for your device.
See the application notes for USRP2/N-Series for instructions.
Expected protocol compatibility number [10 to 12], but got 7:
The firmware build is not compatible with the host code build.
Please run:
"/home/jmat/GR/lib64/uhd/utils/uhd_images_downloader.py"
"/home/jmat/GR/bin/uhd_image_loader" \
--args="type=usrp2,addr=192.168.10.2"
[INFO] [USRP2] Opening a USRP2/N-Series device...
[ERROR] [UHD] Exception caught in safe-call.
in virtual usrp2_iface_impl::~usrp2_iface_impl()
at /home/jmat/GR/src/uhd/host/lib/usrp/usrp2/usrp2_iface.cpp:81
this->lock_device(false); -> RuntimeError:
Please update the firmware and FPGA images for your device.
See the application notes for USRP2/N-Series for instructions.
Expected protocol compatibility number [10 to 12], but got 7:
The firmware build is not compatible with the host code build.
Please run:
"/home/jmat/GR/lib64/uhd/utils/uhd_images_downloader.py"
"/home/jmat/GR/bin/uhd_image_loader" \
--args="type=usrp2,addr=192.168.10.2"
Error: RuntimeError:
Please update the firmware and FPGA images for your device.
See the application notes for USRP2/N-Series for instructions.
Expected protocol compatibility number [10 to 12], but got 7:
The firmware build is not compatible with the host code build.
Please run:
"/home/jmat/GR/lib64/uhd/utils/uhd_images_downloader.py"
"/home/jmat/GR/bin/uhd_image_loader" \
--args="type=usrp2,addr=192.168.10.2"
I have this issue with a bunch of devices that have been sitting on my
shelf for a while. Is it too old to do the upgrade and I need to do
some sort of intermediate upgrade first?
"./usrp_burn_mb_eeprom --args="addr=192.168.10.2" --read-all" gives the
same results as above.
Yet I also get this (which shows me that it can kind of see it):
$ uhd_find_devices
[INFO] [UHD] linux; GNU C++ version 4.8.5 20150623 (Red Hat 4.8.5-16);
Boost_105300; UHD_3.11.0.0-34-g4844f66d
[ERROR] [UHD] Exception caught in safe-call.
in virtual usrp2_iface_impl::~usrp2_iface_impl()
at /home/jmat/GR/src/uhd/host/lib/usrp/usrp2/usrp2_iface.cpp:81
this->lock_device(false); -> RuntimeError:
Please update the firmware and FPGA images for your device.
See the application notes for USRP2/N-Series for instructions.
Expected protocol compatibility number [10 to 12], but got 7:
The firmware build is not compatible with the host code build.
Please run:
"/home/jmat/GR/lib64/uhd/utils/uhd_images_downloader.py"
"/home/jmat/GR/bin/uhd_image_loader" \
--args="type=usrp2,addr=192.168.10.2"
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
serial:
addr: 192.168.10.2
name:
type: usrp2
Pings to its IP work fine. But when I run one of the commands and watch
it via wireshark, I see that every packet from my N210 is coming up
with a "ETHERNET FRAME CHECK SEQUENCE INCORRECT". That could be an
issue, or it could be something that always happens and I can ignore it
in this care.
Is there anyway to revive these units????
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
