Hello Kazem:
Just follow the instructions in the error message:
"/usr/local/lib/uhd/utils/uhd_images_downloader.py"
"/usr/local/bin/uhd_image_loader" \
--args="type=usrp2,addr=192.168.10.3"
You may have to add "sudo" in front of the commands. Also, you may have to
install python-request to get uhd_images_downloader.py working. Finally, you
may have to power-cycle the USRP after running the above commands.
Regards,
Kyeong Su Shin
________________________________
보낸 사람: kazem chm via USRP-users <usrp-users@lists.ettus.com> 대신 USRP-users
<usrp-users-boun...@lists.ettus.com>
보낸 날짜: 2018년 4월 28일 토요일 오후 11:14:04
받는 사람: usrp-users@lists.ettus.com
제목: [USRP-users] (no subject)
Good day dear Sir,
I am a new user of Ubuntu and USRP. I'm trying to connect my PC to USRP N200,
but I have encountered the error below. I have installed and uninstalled my
GNU radio and UHD several times, but what I get is still the latest version in
which is not compatible with my FPGA. I guess I need to upgrade my FPGA on USRP
but I have no idea how to do that. Please give me a step by step guide to solve
this problem.
warm regards,
Kazem
The error:
RuntimeError:
Please update the firmware and FPGA images for your device.
See the application notes for USRP2/N-Series for instructions.
Expected FPGA compatibility number 11, but got 10:
The FPGA build is not compatible with the host code build.
Please run:
"/usr/local/lib/uhd/utils/uhd_images_downloader.py"
"/usr/local/bin/uhd_image_loader" \
--args="type=usrp2,addr=192.168.10.3"
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
