On 04/04/2018 12:37 AM, Matheou, Konstantin J. (GRC-LCI0)[ZIN
TECHNOLOGIES INC] via USRP-users wrote:
To All,
I have tried to use the Header block approach which is found on the
Internet to try to fix this issue…
Here is the issue…
I am capturing samples via an antenna on the E310.
I used GRC to create the flowgraph to capture samples to go to a file.
But, I have to remove the ethernet cable to the E310.
When this is done, it seems the data collecting process stops.
Is there a work around using GRC?
Or do I have to create another python code to run the GRC created
python code for a certain amount of time using Linux or python code?
If anyone has any advice or example code, it would be much appreciated.
Thanks,
Konstantin
WHen you SSH into a machine, and disconnect the cable, eventually, SSH
will drop the connection, which causes your session to be terminated,
including
any processes that you have have started from that session.
You could look into the "nohup" command....
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
