On 03/23/2018 01:30 PM, Rob Kossler wrote:
I had the same issue today. but, I had done a "make install"
previously. I fixed by setting the environment variable UHD_RFNOC_DIR
to point to the correct install folder, in my case
"HOME/uhd/maint/share/uhd/rfnoc/"
Rob
So, perhaps Martin could comment on whether this is an explicit desired
change in behavior or not.
On Fri, Mar 23, 2018 at 12:35 PM, Marcus D. Leech via USRP-users
<usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote:
On 03/23/2018 12:30 PM, Matis Alun via USRP-users wrote:
yes of course:
total 76
-rw-r--r--. 1 root root 1433 2 nov. 2016 addsub.xml
-rw-r--r--. 1 root root 363 2 nov. 2016 block.xml
-rw-r--r--. 1 root root 2944 2 nov. 2016 ddc_single.xml
-rw-r--r--. 1 root root 3875 2 nov. 2016 ddc.xml
-rw-r--r--. 1 root root 1677 2 nov. 2016 dma_fifo.xml
-rw-r--r--. 1 root root 2393 2 nov. 2016 duc.xml
-rw-r--r--. 1 root root 3845 2 nov. 2016 fft.xml
-rw-r--r--. 1 root root 899 2 nov. 2016 fifo.xml
-rw-r--r--. 1 root root 365 2 nov. 2016 fir.xml
-rw-r--r--. 1 root root 4500 2 nov. 2016 fosphor.xml
-rw-r--r--. 1 root root 1374 2 nov. 2016 keep_one_in_n.xml
-rw-r--r--. 1 root root 1262 2 nov. 2016 logpwr.xml
-rw-r--r--. 1 root root 554 2 nov. 2016 nullblock.xml
-rw-r--r--. 1 root root 624 2 nov. 2016 ofdmeq.xml
-rw-r--r--. 1 root root 1531 2 nov. 2016 packetresizer.xml
-rw-r--r--. 1 root root 1582 2 nov. 2016 radio_x300.xml
-rw-r--r--. 1 root root 3432 2 nov. 2016 siggen.xml
-rw-r--r--. 1 root root 1170 2 nov. 2016 window.xml
I think what you did was you *built* the new version of UHD, but
never actually installed it, via sudo make install, so when you
are executing bits and
pieces from the built-but-not-yet-installed files, they're
naturally expecting to find config files, and xml files, etc, in
their "natural" places.
You'll have to uninstall the UHD you already have, which was
likely installed from a pre-packaged release (via a PPA?), and
then run the
sudo make install in the source tree.
Le 23/03/2018 à 17:18, Marcus D. Leech via USRP-users a écrit :
On 03/23/2018 11:30 AM, Matis Alun via USRP-users wrote:
yes, I have a /usr/share/uhd/rfnoc/blocks directory with
several xml files.
matis
Could you do an ls -l on that directory and share it with us?
Le 23/03/2018 à 16:20, Marcus D. Leech via USRP-users a écrit :
On 03/23/2018 10:32 AM, Matis Alun via USRP-users wrote:
Hi,
I've been working with N210 for a long time now with very
successful story.
I recently buy an x300 with TwinRX and I try do run the demo
examples (so I am in the very first stage of testing).
I compiled the uhd 3.010.003 with succes and I can pinf the
X300 at ip 192.168.10.2.
I upload the fpga image usrp_x300_fpga_HG.bit on the board.
Runing uhd_find_device gives:
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
type: x300
addr: 192.168.10.2
fpga: HG
name:
serial: 31402AC
product: X300
But runing uhd_usrp_probe gives:
linux; GNU C++ version 7.3.1 20180303 (Red Hat 7.3.1-5); Boost_106400;
UHD_003.010.003.000-0-unknown
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...
-- Setup RF frontend clocking...
-- Radio 1x clock:200
Error: AssertionError: Failed to find a valid XML path for RFNoC blocks.
Try setting the enviroment variable UHD_RFNOC_DIR to the correct location
[ravard@starduck utils]$ ./uhd_usrp_probe --args
"type=x300,addr=192.168.10.2"
linux; GNU C++ version 7.3.1 20180303 (Red Hat 7.3.1-5); Boost_106400;
UHD_003.010.003.000-0-unknown
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...
-- Setup RF frontend clocking...
-- Radio 1x clock:200
Error: AssertionError: Failed to find a valid XML path for RFNoC blocks.
Try setting the enviroment variable UHD_RFNOC_DIR to the correct location
Can someone tell me what is the problem ?
Thanks
Matis
Do you have a /usr/local/share/uhd/rfnoc/blocks directory?
Or a /usr/share/uhd/rfnoc/blocks directory?
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
<http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
<http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
<http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
<http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
<http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
