On 03/10/2018 02:43 AM, 賴明煊 via USRP-users wrote:
Hi
The problem of my last e-mail "Problem of Octoclock" has been solved.
That is, I can see my Octoclock-G using "uhd_find_devices" and
"uhd_usrp_probe".
I follow the instructions as the link to update EEPROM.
https://files.ettus.com/manual/page_octoclock.html
Then I run "uhd_usrp_probe" again, and it says that "No GPSDO found".
So the only LED lit on the front panel is the "POWER" one even the
switch is on the "INTERNAL" side......
Also my UHD version is 3.10 which is above 3.9.2.
What is the potential problem? I deeply doubt that something is broken
in my Octoclock-G.
Need some help.
Sean
Can you look at one of the 10Mhz outputs with an oscilloscope or
frequency counter to see if there's a signal coming out of them?
Are you sure that you have the "G" model, with a built-in GPSDO?
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
