Dear Sailor Jerry, I'm not sure I'm following here: The 10 MHz connector is hardware-wise connected only to inputs, not to anything that can output anything; compare the schematic[1] on page 1. So, I'm pretty certain your device can't be condigured to have the 10 MHz connector be an output for anything.
Can you maybe describe the problem you're having? Best regards, Marcus [1] https://files.ettus.com/schematics/b200/b210.pdf On Fri, 2018-03-09 at 23:51 +0000, Sailor Jerry via USRP-users wrote: > I inherited the B210 board that has the 10 MHz connector configured > as an output. I wonder if anyone is aware of this configuration and > if it's possible to reconfigure it to accept the external 10 MHz > input. > > My current plan is simply remove GPSDO and hope for the best. > > Attached are two pictures of my board. One is with GPSDO inserted and > another one with GPSDO removed. > > Thanks a lot! > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
