1. yes 2. RFNoC I refer back to a post I wrote detailing loopback in the FPGA. It doesn't work "out of the box" but can be made to with minor modification.
https://corvid.io/2017/04/22/stupid-rfnoc-tricks-loopback/ If you haven't used RFNoC before you should probably take on the Getting Started guide first: https://kb.ettus.com/Getting_Started_with_RFNoC_Development Nick On Fri, Feb 23, 2018 at 9:28 AM Adam Kurisko via USRP-users < usrp-users@lists.ettus.com> wrote: > Hello all, > > > I am trying to utilize the full performance of the E310 and it seems like > the Arm processor is the bottleneck in this scenario. I know the AD9361 is > wired straight into the fpga, so it would make sense that a strictly bare > metal loopback is possible. > > > Is it possible to stream data straight from RX to TX without sending or > receiving from the host ARM processor? And if so, how would I do this? > > > Please let me know. > > > Thank you, > > Adam > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
