Oohhhhh, I forgot about the FPGA vs analog side.  Thanks gents!

On Sat, Feb 17, 2018 at 11:10 AM, Marcus Müller via USRP-users <
usrp-users@lists.ettus.com> wrote:

> To expand on that: timed commands do exist for all things that the FPGA
> can control – that is: start/stop of sampling, DSP offset tuning,
> antenna switching, GPIOs etc.
> They do not work for anything that happens on the AD9361 (analog
> tuning, gain control,…), because that thing itself isn't controllable
> essentially by FPGA IOs like the tuners etc on let's say a WBX, but via
> a (complex) serial protocol.
>
> Best regards,
> Marcus the younger
>
> On Sat, 2018-02-17 at 10:07 -0500, Marcus D. Leech via USRP-users
> wrote:
> > On 02/17/2018 09:59 AM, Dave NotTelling via USRP-users wrote:
> > > I recall that the B2x0 series do not support timed commands like
> > > the
> > > N2x0 or the X3x0 series.  While looking through the source code I
> > > ran
> > > across some code that shows the "time/cmd" entry in the tree being
> > > set
> > > [1].  That key seems to be what multi_usrp uses to set timed
> > > commands
> > > [2].  I then went to the KB [3] and saw that the B2x0 series is
> > > listed
> > > as having timed commands on the FPGA just like the N2x0
> > > series.  So,
> > > does this mean that the B2x0 radios do now support timed commands?
> > >
> > > Thanks!
> > >
> > > -Dave
> > >
> >
> > They support timed commands, except that timed tuning doesn't work
> > the
> > way it does for N3xx or X3xx with boards like WBX and SBX -- there's
> > no
> >    phase-resynch feature.
> >
> >
> >
> >
> > _______________________________________________
> > USRP-users mailing list
> > USRP-users@lists.ettus.com
> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to