Hello all, Please forgive my typo in the link for the Windows and Fedora installers. The correct link is http://files.ettus.com/binaries/uhd/uhd_003.010.003.000- release/
Regards, Michael On Wed, Jan 31, 2018 at 11:59 AM, Michael West <michael.w...@ettus.com> wrote: > Hello all, > > UHD 3.10.3.0 is now available. This is an update to the main series of > releases. > > The tag for this release is located here: > https://github.com/EttusResearch/uhd/releases/tag/release_003_010_003_000 > > Installers for Windows and Fedora are available here: > http://files.ettus.com/binaries/uhd/uhd_003.010.003.000-release/ > <http://files.ettus.com/binaries/uhd/uhd_003.010.002.000-release/> > > The PPA for Ubuntu will have updated installers shortly: > https://launchpad.net/~ettusresearch/+archive/ubuntu/uhd > <https://launchpad.net/%7Eettusresearch/+archive/ubuntu/uhd> > > There have been 25 commits since the last release which can be viewed > here: > https://github.com/EttusResearch/uhd/compare/release_003_010_002_000... > release_003_010_003_000 > > CHANGELOG: > > ## 003.010.003.000 > > * X300 > ** Fix max rate calculation for 1 GbE > ** Fix for DAC synchronization errors (unexpected FIFO depth) > ** Reduced CPU usage during TX > * N230 > ** Properly initialize request structure before discovery > * B200 > ** FX3 firmware performance optimizations > ** Fixed sequence error on second TX burst > * TwinRX > ** Added ADF5356 synth and Rev C support > * UBX > ** Add implementation of TDD xcvr_mode and for TX PA on in TDD mode (to > reduce transient on older revs) > ** Add support for UBX-TDD > * C API > ** Fixed dboard EEPROM revision error handling > ** Make uhd_rx_streamer_last_error use SAFE_C > ** Better error handling in uhd_usrp_get_[t/r]x_stream > * RFNoC > ** Fix ctrl_iface to pop sequence numbers only after success > ** Fix sequence number error message in ctrl_iface > ** FPGA fix for sr_read() failure to ack errors > ** FPGA fix for repeated sequence number for RX packets with 1 sample > ** FPGA fix for axi_serializer edge case > * Docs > ** Fixed B200 power LED description > ** Update README application links > * UHD > ** Utilize poll() instead of select() for UDP transports where possible to > avoid descriptor limits > ** Fix build with Boost 1.66 > ** Add EEPROM info to dboard_base class so daughterboard code can access > all EEPROM info > > Best regards, > Michael >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
